- 1.3244, AISI M3C1.2+Co round bar
- 1.3244, AISI M3C1.2+Co forging
- 1.3244, AISI M3C1.2+Co sheet
- 1.3244, AISI M3C1.2+Co flat bar
- 1.3244, AISI M3C1.2+Co pipe
1.3244, AISI M3C1.2+Co
We can produce 1.3244, AISI M3C1.2+Co stainless steel round rods, 1.3244, AISI M3C1.2+Co forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.3244, AISI M3C1.2+Co chemical composition and 1.3244, AISI M3C1.2+Co mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.3244, AISI M3C1.2+Co Tool Steel
Designation by Standards
| Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
| RAVNE30 | 270 | 1.3244 | - | - | M3C1.2+Co |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 1.25 | max. 0.70 | max. 0.50 | 4.12 | 5.00 | max. 0.50 | 2.95 | 6.32 | Co: 8.38 |
Description
Molybdenum powder metallurgical (PM) high speed steel/" target="_blank" class="keylink">tool steel with high cobalt, produced by gas atomization, hot isostatic pressing and plastic deformation. Very high resistance to wear and to softening. High compression strength. Deep hardening response and much better toughness than conventional high speed steel/" target="_blank" class="keylink">tool steel. Very good dimensional stability at hardening.
Applications
End mills, milling cutters, broach needles, cutting and punching, tools, dies, working rolls for cluster rolling stand.
Physical properties (avarage values) at ambient temperature
Density [g/cm3]: 8.08
Soft Annealing
Please ask.
Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 650oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening
Please ask.
Tempering
Tempering temperature: Please ask.
Forging
Hot forming temperature: No data.
Mechanical properties
1.3244, AISI M3C1.2+Co Mechanical properties,Our production completely according to the 1.3244, AISI M3C1.2+Co standards to meet the 1.3244, AISI M3C1.2+Co mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.3244, AISI M3C1.2+Co mechanical properties.
Heat treatment
1.3244, AISI M3C1.2+Co Heat treatment,Our production completely according to the 1.3244, AISI M3C1.2+Co standards to meet the 1.3244, AISI M3C1.2+Co Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.3244, AISI M3C1.2+Co Heat treatment.
Machining
1.3244, AISI M3C1.2+Co Machining,Our production completely according to the 1.3244, AISI M3C1.2+Co standards to meet the 1.3244, AISI M3C1.2+Co Machining, can also according to the customer request, to meet the requirements of customers of 1.3244, AISI M3C1.2+Co Machining.
Welding performance
1.3244, AISI M3C1.2+Co Welding performance,Our production completely according to the 1.3244, AISI M3C1.2+Co standards to meet the 1.3244, AISI M3C1.2+Co Welding performance, can also according to the customer request, to meet the requirements of customers of 1.3244, AISI M3C1.2+Co Welding performance.
Related hot word search:1.3244 AISI M3C1.2+Co Tool Steel round bar 1.3244, AISI M3C1.2+Co,forging 1.3244, AISI M3C1.2+Co,1.3244, AISI M3C1.2+Co sheet,coil 1.3244, AISI M3C1.2+Co,1.3244, AISI M3C1.2+Co flat bar,pipe 1.3244, AISI M3C1.2+Co,1.3244, AISI M3C1.2+Co Lrregular