Home > Carbon Steel > SAE J403

SAE J403

We can produce SAE J403 stainless steel round rods, SAE J403 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control SAE J403 chemical composition and SAE J403 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

Categories: Metal; Ferrous Metal; Carbon Steel; AISI 1000 Series Steel; Low Carbon steel

Material Notes: AISI 1005 Low Carbon steel

Key Words: UNS G10050, ASTM A29, ASTM A510, MIL SPEC MIL-S-11310 (CS1005), SAE J403, SAE J412

Physical Properties	Metric	English	Comments
Density	7.872 g/cc	0.2844 lb/in³	Composition 0.06% C, 0.38% Mn, 0.01% Si, annealed at 925°C

Mechanical Properties	Metric	English	Comments
Modulus of Elasticity	200 GPa	29000 ksi	Typical for steel
Bulk Modulus	140 GPa	20300 ksi	Typical for steel
Poissons Ratio	0.290	0.290	Typical For steel
Shear Modulus	80.0 GPa	11600 ksi	Typical for steel

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.0000174 ohm-cm	0.0000174 ohm-cm	Typical steel

Thermal Properties	Metric	English	Comments
CTE, linear	12.6 µm/m-°C @Temperature 0.000 - 100 °C	7.00 µin/in-°F @Temperature 32.0 - 212 °F
	13.1 µm/m-°C @Temperature 0.000 - 200 °C	7.28 µin/in-°F @Temperature 32.0 - 392 °F
	13.5 µm/m-°C @Temperature 0.000 - 300 °C	7.50 µin/in-°F @Temperature 32.0 - 572 °F
	13.7 µm/m-°C @Temperature 0.000 - 400 °C	7.61 µin/in-°F @Temperature 32.0 - 752 °F
	13.7 µm/m-°C @Temperature 0.000 - 1000 °C	7.61 µin/in-°F @Temperature 32.0 - 1830 °F
	14.2 µm/m-°C @Temperature 0.000 - 500 °C	7.89 µin/in-°F @Temperature 32.0 - 932 °F
	14.6 µm/m-°C @Temperature 0.000 - 600 °C	8.11 µin/in-°F @Temperature 32.0 - 1110 °F
	14.9 µm/m-°C @Temperature 0.000 - 700 °C	8.28 µin/in-°F @Temperature 32.0 - 1290 °F
	16.6 µm/m-°C @Temperature 0.000 - 800 °C	9.22 µin/in-°F @Temperature 32.0 - 1470 °F
Specific Heat Capacity	0.481 J/g-°C	0.115 BTU/lb-°F	50-100°C (122-212°F)
	0.519 J/g-°C @Temperature 150 - 200 °C	0.124 BTU/lb-°F @Temperature 302 - 392 °F
	0.536 J/g-°C @Temperature 200 - 250 °C	0.128 BTU/lb-°F @Temperature 392 - 482 °F
	0.553 J/g-°C @Temperature 250 - 300 °C	0.132 BTU/lb-°F @Temperature 482 - 572 °F
	0.595 J/g-°C @Temperature 350 - 400 °C	0.142 BTU/lb-°F @Temperature 662 - 752 °F
	0.662 J/g-°C @Temperature 450 - 500 °C	0.158 BTU/lb-°F @Temperature 842 - 932 °F
	0.754 J/g-°C @Temperature 550 - 600 °C	0.180 BTU/lb-°F @Temperature 1020 - 1110 °F
	0.846 J/g-°C @Temperature 850 - 900 °C	0.202 BTU/lb-°F @Temperature 1560 - 1650 °F
	0.867 J/g-°C @Temperature 650 - 700 °C	0.207 BTU/lb-°F @Temperature 1200 - 1290 °F
	1.105 J/g-°C @Temperature 700 - 750 °C	0.2641 BTU/lb-°F @Temperature 1290 - 1380 °F

Component Elements Properties	Metric	English	Comments
Carbon, C	<= 0.060 %	<= 0.060 %
Iron, Fe	99.5 - 100 %	99.5 - 100 %	As remainder
Manganese, Mn	<= 0.35 %	<= 0.35 %
Phosphorous, P	<= 0.040 %	<= 0.040 %
Sulfur, S	<= 0.050 %	<= 0.050 %

Mechanical properties

SAE J403 Mechanical properties,Our production completely according to the SAE J403 standards to meet the SAE J403 mechanical performance, can also according to the customer request, to meet the requirements of customers of SAE J403 mechanical properties.

Heat treatment

SAE J403 Heat treatment,Our production completely according to the SAE J403 standards to meet the SAE J403 Heat treatment, can also according to the customer request, to meet the requirements of customers of SAE J403 Heat treatment.

Machining

SAE J403 Machining,Our production completely according to the SAE J403 standards to meet the SAE J403 Machining, can also according to the customer request, to meet the requirements of customers of SAE J403 Machining.

Welding performance

SAE J403 Welding performance,Our production completely according to the SAE J403 standards to meet the SAE J403 Welding performance, can also according to the customer request, to meet the requirements of customers of SAE J403 Welding performance.

Prev:AISI 1020
Next:1.0037