- 1.1170, DIN 28Mn6, AISI 1330 round bar
- 1.1170, DIN 28Mn6, AISI 1330 forging
- 1.1170, DIN 28Mn6, AISI 1330 sheet
- 1.1170, DIN 28Mn6, AISI 1330 flat bar
- 1.1170, DIN 28Mn6, AISI 1330 pipe
1.1170, DIN 28Mn6, AISI 1330
Production specification
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.1170, DIN 28Mn6, AISI 1330
Designation by Standards
Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
28MN6 | 778 | 1.1170 | 28Mn6 | - | 1330 |
Chemical Composition (in weight %)
C | Si | Mn | Cr | Mo | Ni | V | W | Others |
0.28 | max. 0.40 | 1.48 | max. 0.40 | max. 0.10 | max. 0.40 | - | - | (Cr+Mo+Ni)=max. 0.63 |
Description
Manganese steel for moderate and lower temperature use in pressure vessels.
Applications
Used for weld fabrication of pressure vessels that require improved notch toughness for lower than ambient temperature service. Low and moderately stressed parts for vehicles, machines and engines.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.83
Soft Annealing
This will produce a maximum Brinell hardness of 223.
Normalizing
Normalizing temperature: 850-890oC.
Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to approx. 650oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening
Harden from a temperature of 830-870oC followed by water or oil quenching.
Tempering
Tempering temperature: 540-680oC
Mechanical Properties in Normalized Condition
Diameter (mm) |
0.2 % proof stress min.(N/mm2) |
Tensile strength min. (N/mm2) |
Elongation min.(%) |
up to 16 | 345 | 630 | 17 |
17-40 | 310 | 680 | 18 |
41-100 | 290 | 590 | 18 |
Mechanical Properties in Quenched and Tempered Condition
Diameter (mm) |
0.2 % proof stress min. (N/mm2) |
Tensile strength min. (N/mm2) |
Elongation min.(%) |
Reduction of area min. (%) |
Notch impact energy (ISO-V) min. (J) |
up to 16 | 590 | 800-950 | 13 | 40 | 35 |
17-40 | 490 | 700-850 | 15 | 45 | 40 |
41-100 | 440 | 650-800 | 16 | 50 | 40 |
101-160 | 390 | 590-740 | 18 | - | - |
161-250 | 390 | 590-740 | 18 | - | - |
251-500 | 340 | 540-690 | 19 | - | - |
Hardenability in the end-quench test
Quenching temperature in the end-quench test is 850oC
Hardness | 1.5 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 |
H max. | 54 | 53 | 51 | 48 | 44 | 41 | 38 | 35 | 31 | 29 | 27 | 26 | 25 | 25 | 24 |
H min. | 45 | 42 | 37 | 27 | 21 | - | - | - | - | - | - | - | - | - | - |
HH max. | 54 | 53 | 51 | 48 | 44 | 41 | 38 | 35 | 31 | 29 | 27 | 26 | 25 | 25 | 24 |
HH min. | 48 | 46 | 42 | 34 | 30 | 27 | 24 | 21 | - | - | - | - | - | - | - |
HL max. | 51 | 49 | 46 | 41 | 35 | 32 | 29 | 22 | 20 | - | - | - | - | - | - |
HL min. | 45 | 42 | 37 | 27 | 21 | - | - | - | - | - | - | - | - | - | - |
Forging
Hot forming temperature: 1050-850oC.
Machinability
Machinability of this steel is good.
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search:1.1170 DIN 28Mn6 AISI 1330 round bar 1.1170, DIN 28Mn6, AISI 1330,forging 1.1170, DIN 28Mn6, AISI 1330,1.1170, DIN 28Mn6, AISI 1330 sheet,coil 1.1170, DIN 28Mn6, AISI 1330,1.1170, DIN 28Mn6, AISI 1330 flat bar,pipe 1.1170, DIN 28Mn6, AISI 1330,1.1170, DIN 28Mn6, AISI 1330 Lrregular
Prev:Steel 45M5S
Next:1.1240, DIN 65Mn4