- 1.0301, DIN 1.0301, AISI 1010 round bar
- 1.0301, DIN 1.0301, AISI 1010 forging
- 1.0301, DIN 1.0301, AISI 1010 sheet
- 1.0301, DIN 1.0301, AISI 1010 flat bar
- 1.0301, DIN 1.0301, AISI 1010 pipe
1.0301, DIN 1.0301, AISI 1010
We can produce 1.0301, DIN 1.0301, AISI 1010 stainless steel round rods, 1.0301, DIN 1.0301, AISI 1010 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.0301, DIN 1.0301, AISI 1010 chemical composition and 1.0301, DIN 1.0301, AISI 1010 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.0301, DIN 1.0301, AISI 1010
Designation by Standards
| Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
| C10 | 512 | 1.0301 | C10 | - | 1010 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.10 | max. 0.40 | 0.45 | - | - | - | - | - | - |
Description
C10 is a plain carbon steel with a nominal 0.10% carbon content. It is a relatively low strength steel but it may be quenched and tempered for increased strength.
Applications
The low carbon steels, such as C10, are used for applications such as cold headed fasteners and bolts.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.85
Thermal conductivity [W/m.K]: 58.6
Electric resistivity [Ohm mm2/m]: 0.11
Specific heat capacity[J/g.K]: 0.46
Coefficient of Linear Thermal Expansion 10-6 oC-1
| 20-100oC | 20-200oC |
| 11.0 | 11.8 |
Soft Annealing
Heat to 850-950oC, cool slowly. This will produce a hardness of 90-100 HB.
Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to approx. 540oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Forging
Hot forming temperature: 1200-950oC.
Machinability
Machinability of C10 steel is fairly good, especially in the cold drawn or cold worked condition. Based upon carbon steel AISI 1112 as a reference that is considered 100% machinable (easily machined) the C10 steel has a rating of 55%.
Corrosion Resistance
This is a plain carbon steel and has no corrosion resistance. It will rust unless protected.
Welding
C10 steel may be welded by all of the standard welding techniques.
Cold Working
C10 is easily cold worked by traditional means. Following severe cold working a stress relief, or full, anneal should be performed.
Mechanical properties
1.0301, DIN 1.0301, AISI 1010 Mechanical properties,Our production completely according to the 1.0301, DIN 1.0301, AISI 1010 standards to meet the 1.0301, DIN 1.0301, AISI 1010 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.0301, DIN 1.0301, AISI 1010 mechanical properties.
Heat treatment
1.0301, DIN 1.0301, AISI 1010 Heat treatment,Our production completely according to the 1.0301, DIN 1.0301, AISI 1010 standards to meet the 1.0301, DIN 1.0301, AISI 1010 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.0301, DIN 1.0301, AISI 1010 Heat treatment.
Machining
1.0301, DIN 1.0301, AISI 1010 Machining,Our production completely according to the 1.0301, DIN 1.0301, AISI 1010 standards to meet the 1.0301, DIN 1.0301, AISI 1010 Machining, can also according to the customer request, to meet the requirements of customers of 1.0301, DIN 1.0301, AISI 1010 Machining.
Welding performance
1.0301, DIN 1.0301, AISI 1010 Welding performance,Our production completely according to the 1.0301, DIN 1.0301, AISI 1010 standards to meet the 1.0301, DIN 1.0301, AISI 1010 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.0301, DIN 1.0301, AISI 1010 Welding performance.
Related hot word search:1.0301 DIN 1.0301 AISI 1010 round bar 1.0301, DIN 1.0301, AISI 1010,forging 1.0301, DIN 1.0301, AISI 1010,1.0301, DIN 1.0301, AISI 1010 sheet,coil 1.0301, DIN 1.0301, AISI 1010,1.0301, DIN 1.0301, AISI 1010 flat bar,pipe 1.0301, DIN 1.0301, AISI 1010,1.0301, DIN 1.0301, AISI 1010 Lrregular
Prev:1.1240, DIN 65Mn4
Next:1.0401, DIN C15, AISI 1015