- AISI 4620 round bar
- AISI 4620 forging
- AISI 4620 sheet
- AISI 4620 flat bar
- AISI 4620 pipe
AISI 4620
We can produce AISI 4620 stainless steel round rods, AISI 4620 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control AISI 4620 chemical composition and AISI 4620 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Component Elements Properties
|
Metric
|
English
|
Comments
|
Carbon, C
|
0.170 - 0.230 %
|
0.170 - 0.230 %
|
|
Iron, Fe
|
96.295 - 97.58 %
|
96.295 - 97.58 %
|
As remainder
|
Manganese, Mn
|
0.350 - 0.750 %
|
0.350 - 0.750 %
|
|
0.200 - 0.300 %
|
0.200 - 0.300 %
|
||
Nickel, Ni
|
1.55 - 2.00 %
|
1.55 - 2.00 %
|
|
Phosphorous, P
|
<= 0.0350 %
|
<= 0.0350 %
|
|
0.150 - 0.350 %
|
0.150 - 0.350 %
|
||
Sulfur, S
|
<= 0.0400 %
|
<= 0.0400 %
|
Physical Properties
|
Metric
|
English
|
Comments
|
Density
|
7.85 g/cc
|
0.284 lb/in³
|
|
|
|||
Mechanical Properties
|
Metric
|
English
|
Comments
|
Hardness, Brinell
|
149
|
149
|
|
Hardness, Knoop
|
169
|
169
|
Converted from Brinell hardness.
|
Hardness, Rockwell B
|
80
|
80
|
Converted from Brinell hardness.
|
Hardness, Vickers
|
155
|
155
|
Converted from Brinell hardness.
|
Tensile Strength, Ultimate
|
510 MPa
|
74000 psi
|
|
Tensile Strength, Yield
|
370 MPa
|
53700 psi
|
|
Elongation at Break
|
31.3 %
|
31.3 %
|
in 50 mm
|
Reduction of Area
|
60.3 %
|
60.3 %
|
|
Modulus of Elasticity
|
205 GPa
|
29700 ksi
|
Typical for steel
|
Bulk Modulus
|
140 GPa
|
20300 ksi
|
Typical for steel.
|
Poissons Ratio
|
0.290
|
0.290
|
Calculated
|
Machinability
|
65 %
|
65 %
|
Hot rolled and cold drawn. Based on 100% machinability for AISI 1212 steel.
|
Shear Modulus
|
80.0 GPa
|
11600 ksi
|
Typical for steel
|
Mechanical properties
AISI 4620 Mechanical properties,Our production completely according to the AISI 4620 standards to meet the AISI 4620 mechanical performance, can also according to the customer request, to meet the requirements of customers of AISI 4620 mechanical properties.
Heat treatment
AISI 4620 Heat treatment,Our production completely according to the AISI 4620 standards to meet the AISI 4620 Heat treatment, can also according to the customer request, to meet the requirements of customers of AISI 4620 Heat treatment.
Machining
AISI 4620 Machining,Our production completely according to the AISI 4620 standards to meet the AISI 4620 Machining, can also according to the customer request, to meet the requirements of customers of AISI 4620 Machining.
Welding performance
AISI 4620 Welding performance,Our production completely according to the AISI 4620 standards to meet the AISI 4620 Welding performance, can also according to the customer request, to meet the requirements of customers of AISI 4620 Welding performance.
Related hot word search: round bar AISI 4620,forging AISI 4620,AISI 4620 sheet,coil AISI 4620,AISI 4620 flat bar,pipe AISI 4620,AISI 4620 Lrregular