- EN30B Alloy Steel round bar
- EN30B Alloy Steel forging
- EN30B Alloy Steel sheet
- EN30B Alloy Steel flat bar
- EN30B Alloy Steel pipe
EN30B Alloy Steel
Production specification
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
EN30B Alloy Steel
EN30B is a 4¼% nickel air/oil hardening steel. It achieves a good through hardness with high strength and toughness. It is capable of taking a good polish and is widely used as a plastic Mould-steel/" target="_blank" class="keylink">mould steel. |
TYPICAL ANALYSIS |
|
|
|||
C. |
Si. |
Ni. |
Cr. |
Mo. |
|
0.35% |
0.25% |
0.50% |
4.25% |
1.20% |
0.30% |
Forging:
Heat slowly and uniformly to uniformly to 1050°C. After forging cool slowly.
Annealing:
Heat uniformly to 630/650°C. Soak well and cool slowly in the furnace.
Hardening:
Pre heat slowly yo 650/700°C and thoroughly soak. Continue heating to the final hardening temperature of 830/850°C and allow the component to be heated through. Quench in oil or cool in air.
Tempering:
Heat uniformly and thoroughly at the selected tempering temperatures and hold for one hour per inch of total thickness.
Tempering °C |
150 |
250 |
350 |
450 |
HRc |
49 |
47 |
44 |
38 |
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search:EN30B Alloy Steel round bar EN30B Alloy Steel,forging EN30B Alloy Steel,EN30B Alloy Steel sheet,coil EN30B Alloy Steel,EN30B Alloy Steel flat bar,pipe EN30B Alloy Steel,EN30B Alloy Steel Lrregular
Prev:EN26 EN26W Alloy Steel
Next:EN31 Alloy Steel