- EN36 Alloy Steel round bar
- EN36 Alloy Steel forging
- EN36 Alloy Steel sheet
- EN36 Alloy Steel flat bar
- EN36 Alloy Steel pipe
EN36 Alloy Steel
Production specification
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
EN36 Alloy Steel
EN36 is an alloy case hardening steel. Characteristics of the steel are toughness arising from the use of nickel and a more uniform hardness produced by the use of chromium. It is specifically designed for carburising to give a very hard case with a strong core. |
TYPICAL ANALYSIS |
|
|
||
C. |
Si. |
Mn. |
Ni. |
Cr. |
0.15% |
0.25% |
0.50% |
3.50% |
0.90% |
Heat Treatment - Carburising Temperature
Heat to 890°C/920°C and soak for the necessary time to obtain the desired carburised depth.
Single Quench Treatment:
Heat the carburised parts to 800/820°C and quench in oil.
Double Quench Treatment:
Heat the carburised parts to 850/880°C, cool in oil or air then re heat to 760/780C and quench in oil.
Tempering:
After hardening temper at 150°C for 2 hours minimum, and allow to cool in air to give a final surface hardness in the region of Rockwell C60/62.
Condition |
Tensile |
|
Impact |
Impact |
Hardness |
Test Piece |
BC |
1100 |
9 |
40 |
35 |
341 |
19
|
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search:EN36 Alloy Steel round bar EN36 Alloy Steel,forging EN36 Alloy Steel,EN36 Alloy Steel sheet,coil EN36 Alloy Steel,EN36 Alloy Steel flat bar,pipe EN36 Alloy Steel,EN36 Alloy Steel Lrregular
Prev:EN32 EN32B Alloy Steel
Next:EN40B EN40 Alloy Steel