Home > Alloy Steel > AISI 6150 Spring Steel

AISI 6150 Spring Steel

We can produce AISI 6150 Spring Steel stainless steel round rods, AISI 6150 Spring Steel forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control AISI 6150 Spring Steel chemical composition and AISI 6150 Spring Steel mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

AISI 6150 Spring Steel

AISI 6150 is an oil quenching spring steel which offers good wear resistance after heat treatment.

TYPICAL ANALYSIS
C.	Mn.	Cr.	V.
0.50%	0.75%	1.00%	0.15%

Forging:
Forge AISI 6150 at 1050°C. Do not work this steel when it has fallen below 840°C.

Annealing:
Slow furnace cool from 840°/860°C.

Hardening:
Pre heat slowly to 650/700°C and thoroughly soak the AISI 6150 component. Continue heating to the final hardening temperature of 850/870°C and allow the AISI 6150 component to be heated through. Quench in oil.

Tempering:
Temper immediately after quenching whilst tools are still hand warm. Re-heat to the tempering temperature, soak for one hour per 25 millimetre of total thickness, 2 hours minimum, then cool in air. For most applications tempering of AISI 6150 will be between 400°/600°C.

Tempering °C	100	200	300	400	450	500	550	600
HRc	56	53	50	49	46	44	40	36

Mechanical properties

AISI 6150 Spring Steel Mechanical properties,Our production completely according to the AISI 6150 Spring Steel standards to meet the AISI 6150 Spring Steel mechanical performance, can also according to the customer request, to meet the requirements of customers of AISI 6150 Spring Steel mechanical properties.

Heat treatment

AISI 6150 Spring Steel Heat treatment,Our production completely according to the AISI 6150 Spring Steel standards to meet the AISI 6150 Spring Steel Heat treatment, can also according to the customer request, to meet the requirements of customers of AISI 6150 Spring Steel Heat treatment.

Machining

AISI 6150 Spring Steel Machining,Our production completely according to the AISI 6150 Spring Steel standards to meet the AISI 6150 Spring Steel Machining, can also according to the customer request, to meet the requirements of customers of AISI 6150 Spring Steel Machining.

Welding performance

AISI 6150 Spring Steel Welding performance,Our production completely according to the AISI 6150 Spring Steel standards to meet the AISI 6150 Spring Steel Welding performance, can also according to the customer request, to meet the requirements of customers of AISI 6150 Spring Steel Welding performance.

Prev:AISI 4130 Alloy Steel
Next:50CrV4 1.8159 Spring Steel