- 50CrV4 1.8159 Spring Steel round bar
- 50CrV4 1.8159 Spring Steel forging
- 50CrV4 1.8159 Spring Steel sheet
- 50CrV4 1.8159 Spring Steel flat bar
- 50CrV4 1.8159 Spring Steel pipe
50CrV4 1.8159 Spring Steel
We can produce 50CrV4 1.8159 Spring Steel stainless steel round rods, 50CrV4 1.8159 Spring Steel forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 50CrV4 1.8159 Spring Steel chemical composition and 50CrV4 1.8159 Spring Steel mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
50CrV4 1.8159 Spring Steel
|
50CrV4 is a tough oil quenching spring steel. When heat treated 50CrV4 offers good wear resistance. 50CrV4 is characterised by the addition of vanadium to the specification which differs 50CrV4 from standard spring steel specifications. |
|
TYPICAL ANALYSIS |
|
||
|
C. |
Mn. |
Cr. |
V. |
|
0.50% |
0.75% |
1.00% |
0.15% |
Forging:
Forge at 1050°C. Do not work this steel when it has fallen below 840°C.
Annealing:
Slow furnace cool from 840°/860°C.
Hardening:
Pre heat slowly to 650/700°C and thoroughly soak. Continue heating the 50CrV4 component to the final hardening temperature of 850/870°C and allow the component to be heated through. Quench in oil.
Tempering:
Temper the 50CrV4 tool immediately after quenching whilst tools are still hand warm. Re-heat to the tempering temperature, soak for one hour per 25 millimetre of total thickness, 2 hours minimum, then cool in air. For most 50CrV4 applications tempering will be between 400°/600°C.
| Tempering °C |
100 |
200 |
300 |
400 |
450 |
500 |
550 |
600 |
|
HRc |
56 |
53 |
50 |
49 |
46 |
44 |
40 |
36 |
Mechanical properties
50CrV4 1.8159 Spring Steel Mechanical properties,Our production completely according to the 50CrV4 1.8159 Spring Steel standards to meet the 50CrV4 1.8159 Spring Steel mechanical performance, can also according to the customer request, to meet the requirements of customers of 50CrV4 1.8159 Spring Steel mechanical properties.
Heat treatment
50CrV4 1.8159 Spring Steel Heat treatment,Our production completely according to the 50CrV4 1.8159 Spring Steel standards to meet the 50CrV4 1.8159 Spring Steel Heat treatment, can also according to the customer request, to meet the requirements of customers of 50CrV4 1.8159 Spring Steel Heat treatment.
Machining
50CrV4 1.8159 Spring Steel Machining,Our production completely according to the 50CrV4 1.8159 Spring Steel standards to meet the 50CrV4 1.8159 Spring Steel Machining, can also according to the customer request, to meet the requirements of customers of 50CrV4 1.8159 Spring Steel Machining.
Welding performance
50CrV4 1.8159 Spring Steel Welding performance,Our production completely according to the 50CrV4 1.8159 Spring Steel standards to meet the 50CrV4 1.8159 Spring Steel Welding performance, can also according to the customer request, to meet the requirements of customers of 50CrV4 1.8159 Spring Steel Welding performance.
Related hot word search:50CrV4 1.8159 Spring Steel round bar 50CrV4 1.8159 Spring Steel,forging 50CrV4 1.8159 Spring Steel,50CrV4 1.8159 Spring Steel sheet,coil 50CrV4 1.8159 Spring Steel,50CrV4 1.8159 Spring Steel flat bar,pipe 50CrV4 1.8159 Spring Steel,50CrV4 1.8159 Spring Steel Lrregular
Prev:AISI 6150 Spring Steel
Next:1.2311 40CrMnMo7 Tool Steel