- 1.4821, DIN X20CrNiSi25-4 round bar
- 1.4821, DIN X20CrNiSi25-4 forging
- 1.4821, DIN X20CrNiSi25-4 sheet
- 1.4821, DIN X20CrNiSi25-4 flat bar
- 1.4821, DIN X20CrNiSi25-4 pipe
1.4821, DIN X20CrNiSi25-4
Production specification
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.4821, DIN X20CrNiSi25-4
Designation by Standards
Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
PKAS | 918 | 1.4821 | X20CrNiSi25-4 | X15CrNiSi254 | - |
Chemical Composition (in weight %)
C | Si | Mn | Cr | Mo | Ni | V | W | Others |
0.15 | 1.15 | max. 2.00 | 25.50 | - | 4.50 | - | - | - |
Description
Heat resistant steel for temperatures up to 1100oC.
Applications
Grates, furnance fittings and other parts.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 200, 170 (200oC), 162 (500oC), 150 (1000oC)
Density [g/cm3]: Approx. 7.7
Thermal conductivity [W/m.K]: 19.0
Electric resistivity [Ohm mm2/m]: 0.76
Specific heat capacity[J/g.K]: 0.50
Magnetisable: Yes
Coefficient of Linear Thermal Expansion 10-6 oC-1
20-200oC | 20-400oC | 20-600oC | 20-800oC | 20-1000oC |
13.0 | 13.5 | 14.5 | 15.0 | 15.5 |
Hardening
Heat to 1050-1100oC, then quenching in water.
Mechanical properties at at ambient temperature
Condition: Quenched
Hardness: max. 235 HB
0.2% proof stress: 400 N/mm2
Tensile strength: 600-800 N/mm2
Elongation: min. 16%
1% Creep Stress Limit in N/mm2 vs. Temperature in oC
600oC | 700oC | 800oC | 900oC | 1000oC |
27.5 | 8.5 | 3.7 | 1.8 | 0.7 |
Forging
Hot forming temperature: 1150-800oC.
Machinability
No data.
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search:1.4821 DIN X20CrNiSi25-4 round bar 1.4821, DIN X20CrNiSi25-4,forging 1.4821, DIN X20CrNiSi25-4,1.4821, DIN X20CrNiSi25-4 sheet,coil 1.4821, DIN X20CrNiSi25-4,1.4821, DIN X20CrNiSi25-4 flat bar,pipe 1.4821, DIN X20CrNiSi25-4,1.4821, DIN X20CrNiSi25-4 Lrregular