- 1.4713, AISI X10CRAL7 round bar
- 1.4713, AISI X10CRAL7 forging
- 1.4713, AISI X10CRAL7 sheet
- 1.4713, AISI X10CRAL7 flat bar
- 1.4713, AISI X10CRAL7 pipe
1.4713, AISI X10CRAL7
Production specification
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.4713, AISI X10CRAL7
Designation by Standards
Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
X10CRAL7 | 937 | 1.4713 | X10CRAL7 | - | - |
Chemical Composition (in weight %)
C | Si | Mn | Cr | Mo | Ni | V | W | Others |
max.0.12 | 0.75 | max. 1.00 | 7.00 | - | - | - | - | Al=0.75 |
Description
Heat resisting ferritic steel. Heat resistance in air up to 800oC.
Applications
Annealing and hardening shops: Boxes, pots, muffles, retorts, pans and tubs for all kinds of heat treatment. Heating rods and plates. Furnace and steam boiler construction: Grates and grate segments, fittings, conveyor parts, suporting and walking beams, rails, pistons, axle rollers, doors, slides, flaps, casings, recuperators, fans, superheater suspensions, pipe clamps, soot blower tubes. Glass, porcelain, enamelling, cement and ceramics industries: Burner nozzels, rings, segments and other parts for rotary and lepols kilns. General engineering: Grate bars, valves and spindles, stirring arms and teeth, thermocouple protecting tubes, fittings, drums, screws, nuts, rivets. Petroleum industry: Tubes and tubular parts.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 218, 206 (200oC), 190 (400oC), 170 (600oC)
Density [g/cm3]: 7.72
Thermal conductivity [W/m.K]: 23.0
Electric resistivity [Ohm mm2/m]: 0.69
Specific heat capacity[J/g.K]: 0.45
Coefficient of Linear Thermal Expansion 10-6 oC-1
20-100oC | 20-400oC | 20-600oC | 20-800oC |
11.5 | 12.0 | 12.5 | 13.0 |
Continuous Cooling Transformation (CCT) Diagram
Time-Temperature Transformation (TTT) Diagram
Hardening
Harden from a temperature of 750-800oC followed by air or water quenching. Structure is ferrite and pearlite.
Mechanical properties at ambient temperature
Condition: Annealed
Hardness: 192 HB
0.2 % proof stress: 220 N/mm2
Tensile strength: 420-620 N/mm2
Elongation: 20 %
1% Creep Stress Limit t=1000 hours in N/mm2 vs. Temperature (oC)
600oC | 700oC | 800oC | 900oC |
27.5 | 8.5 | 3.7 | 1.8 |
Forging
Hot forming temperature: 1100-800oC.
Machinability
No data.
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search:1.4713 AISI X10CRAL7 round bar 1.4713, AISI X10CRAL7,forging 1.4713, AISI X10CRAL7,1.4713, AISI X10CRAL7 sheet,coil 1.4713, AISI X10CRAL7,1.4713, AISI X10CRAL7 flat bar,pipe 1.4713, AISI X10CRAL7,1.4713, AISI X10CRAL7 Lrregular
Prev:1.4370, DIN X15CrNiMn188
Next:1.4712, DIN X10CrSi6