- DC53 round bar
- DC53 forging
- DC53 sheet
- DC53 flat bar
- DC53 pipe
DC53
We can produce DC53 stainless steel round rods, DC53 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control DC53 chemical composition and DC53 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
|
Physical Properties
|
Metric
|
English
|
Comments
|
|
Specific Gravity
|
7.87g/cc
|
7.87g/cc
|
|
|
|
|||
|
Mechanical Properties
|
Metric
|
English
|
Comments
|
|
Hardness, Rockwell C
|
62.0 - 63.0
|
62.0 - 63.0
|
|
|
Tensile Strength, Ultimate
|
2750 MPa
|
398000 psi
|
when tempered at 175-300°C
|
|
Modulus of Elasticity
|
150 GPa
|
21700ksi
|
|
|
Poissons Ratio
|
0.280
|
0.280
|
|
|
Fatigue Strength
|
8 MPa
@# of Cycles 1.00e+6 |
121000 psi
@# of Cycles 1.00e+6 |
Heat treatment: 1030°C, 520°C (x2), HRc63
|
|
Shear Modulus
|
58.5 GPa
|
8480 ksi
|
Modulus of Rigidity
|
|
|
|||
|
Thermal Properties
|
Metric
|
English
|
Comments
|
|
CTE, linear
|
12.2 µm/m-°C
@Temperature -100 °C |
6.78µin/in-°F
@Temperature -148 °F |
|
|
|
12.3 µm/m-°C
@Temperature 300 °C |
6.83µin/in-°F
@Temperature 572 °F |
|
|
|
13.2 µm/m-°C
@Temperature 500 °C |
7.33 µin/in-°F
@Temperature 932 °F |
|
|
Thermal Conductivity
|
23.8 W/m-K
|
165 BTU-in/hr-ft²-°F
|
RT
|
|
25.1 W/m-K
@Temperature 100 °C |
174 BTU-in/hr-ft²-°F
@Temperature 212 °F |
||
|
|
27.2 W/m-K
@Temperature 400 °C |
188 BTU-in/hr-ft²-°F
@Temperature 752 °F |
|
Mechanical properties
DC53 Mechanical properties,Our production completely according to the DC53 standards to meet the DC53 mechanical performance, can also according to the customer request, to meet the requirements of customers of DC53 mechanical properties.
Heat treatment
DC53 Heat treatment,Our production completely according to the DC53 standards to meet the DC53 Heat treatment, can also according to the customer request, to meet the requirements of customers of DC53 Heat treatment.
Machining
DC53 Machining,Our production completely according to the DC53 standards to meet the DC53 Machining, can also according to the customer request, to meet the requirements of customers of DC53 Machining.
Welding performance
DC53 Welding performance,Our production completely according to the DC53 standards to meet the DC53 Welding performance, can also according to the customer request, to meet the requirements of customers of DC53 Welding performance.
Related hot word search: round bar DC53,forging DC53,DC53 sheet,coil DC53,DC53 flat bar,pipe DC53,DC53 Lrregular