- X4CrNi18-12 round bar
- X4CrNi18-12 forging
- X4CrNi18-12 sheet
- X4CrNi18-12 flat bar
- X4CrNi18-12 pipe
X4CrNi18-12
We can produce X4CrNi18-12 stainless steel round rods, X4CrNi18-12 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control X4CrNi18-12 chemical composition and X4CrNi18-12 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Chemical composition % of the ladle analysis of grade X4CrNi18-12 and Standards
| Grade : | X4CrNi18-12 |
| Number: | 1.4303 |
| Standard: |
EN 10088 - 2 : 2005 stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes EN 10088 - 3 : 2005 stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| Classification: | Austenitic stainless steels - Standard grade |
| Equivalent grades: | Go here |
|
Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted. For polishability, a controlled sulphur content of 0.015 % max is recommended. Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. |
| C | Si | Mn | Ni | P | S | Cr | N |
| max 0.06 | max 1 | max 2 | 11 - 13 | max 0.045 | max 0.015 | 17 - 19 | max 0.11 |
|
USA - |
Japan JIS |
France AFNOR |
England BS |
Russia GOST |
|||||
|
|
|
|
|
Mechanical properties
X4CrNi18-12 Mechanical properties,Our production completely according to the X4CrNi18-12 standards to meet the X4CrNi18-12 mechanical performance, can also according to the customer request, to meet the requirements of customers of X4CrNi18-12 mechanical properties.
Heat treatment
X4CrNi18-12 Heat treatment,Our production completely according to the X4CrNi18-12 standards to meet the X4CrNi18-12 Heat treatment, can also according to the customer request, to meet the requirements of customers of X4CrNi18-12 Heat treatment.
Machining
X4CrNi18-12 Machining,Our production completely according to the X4CrNi18-12 standards to meet the X4CrNi18-12 Machining, can also according to the customer request, to meet the requirements of customers of X4CrNi18-12 Machining.
Welding performance
X4CrNi18-12 Welding performance,Our production completely according to the X4CrNi18-12 standards to meet the X4CrNi18-12 Welding performance, can also according to the customer request, to meet the requirements of customers of X4CrNi18-12 Welding performance.
Related hot word search: round bar X4CrNi18-12,forging X4CrNi18-12,X4CrNi18-12 sheet,coil X4CrNi18-12,X4CrNi18-12 flat bar,pipe X4CrNi18-12,X4CrNi18-12 Lrregular
Prev:X5CrNi18-10
Next:X8CrNiS18-9