- X5CrNiMo17-12-2 round bar
- X5CrNiMo17-12-2 forging
- X5CrNiMo17-12-2 sheet
- X5CrNiMo17-12-2 flat bar
- X5CrNiMo17-12-2 pipe
X5CrNiMo17-12-2
We can produce X5CrNiMo17-12-2 stainless steel round rods, X5CrNiMo17-12-2 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control X5CrNiMo17-12-2 chemical composition and X5CrNiMo17-12-2 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Chemical composition % of the ladle analysis of grade X5CrNiMo17-12-2 and Standards
Identification
|
Designation by Standards
|
|||||
Brand Name
|
Ravne No.
|
Mat. No.
|
DIN
|
EN
|
AISI
|
PK12
|
915
|
1.4401
|
316
|
Chemical Composition
|
Chemical Composition in Weight %
|
||||||||
C
|
Ni
|
V
|
W
|
Others
|
||||
max. 0.07
|
max. 1.00
|
max. 2.00
|
17.50
|
2.25
|
11.50
|
-
|
-
|
-
|
General Information
|
Description This austenitic steel0.com/stainless_steel_1.htm" style="color: rgb(49,75,115); text-decoration: none" target="_blank" title="stainless steel">stainless steel has an increased molybdenum content to increase its resistance to corrosion when compared to other 300 series alloys. It will resist scaling at temperatures up to 871�C and maintains good mechanical properties and ductility. Applications Widely used in industry, it was initially designed for paper mill machinery. It has been used in marine environments and a wide variety of general industrial components. Component parts for the cellulose, paper, oil, soap and textile industry, production of paints, meat processing industry, breweries, dairies and for surgical instruments. |
Properties
|
Physical properties (avarage values) at ambient temperature: Modulus of elasticity [103 x N/mm2]: 200, 186 (200�C), 172(400�C) Density [g/cm3]: 7.98 Thermal conductivity [W/m.K]: 15.0 Electric resistivity [Ohm mm2/m]: 0.75 Specific heat capacity[J/g.K]: 0.50
|
Heat Treatment
|
Hardening Harden from a temperature of 1020-1100�C followed by water or oil quenching. Structure is austenite with small ferrite component. Mechanical properties in solution-annealed condition and reistance to intercrystalline corrosion: 0.2 % proof stress: 200 N/mm2 (for d<=160, 160<d<=250) 1.0 % proof stress: 235 N/mm2 (for d<=160, 160<d<=250) Tensile strength: 500-700 N/mm2 Elongation: 40% (for d<=160, longit.), 30% (for 160<d<=250, transv.) Notch impact energy (ISO-V): 100 J (for d<=160, longit.), 60 J (for 160<d<=250, transv.) Resistance to interystalline corrosion: yes (in as delivered condition), no (in sensitised condition) Note: Sensitisation treatment for 15 min at 700�C with subsequent cooling in air.
|
Workability
|
Forging Hot forming temperature: 1200-900�C. Machinability Low speeds and constant feeds will minimize this alloy's tendency to work harden. Tougher than 304 stainless with a long stringy chip, the use of chip breakers is recommended. |
Other Information
|
Corrosion Resistance: Resistant to a wide variety of marine environments, salts, dilute nitric, acetic and sulfuric acids.
Welding: All common fusion and resistance methods except oxyacetylene Welding have proven successful. Use AWS E/ER316 or 316L filler metal for best results. Cold working: Shearing, stamping, heading and drawing can be successfully performed . To remove internal stresses, a post-work annealing is recommended. Forms manufactured: Please see the Dimensional Sales Program. |
Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.
|
Mechanical properties
X5CrNiMo17-12-2 Mechanical properties,Our production completely according to the X5CrNiMo17-12-2 standards to meet the X5CrNiMo17-12-2 mechanical performance, can also according to the customer request, to meet the requirements of customers of X5CrNiMo17-12-2 mechanical properties.
Heat treatment
X5CrNiMo17-12-2 Heat treatment,Our production completely according to the X5CrNiMo17-12-2 standards to meet the X5CrNiMo17-12-2 Heat treatment, can also according to the customer request, to meet the requirements of customers of X5CrNiMo17-12-2 Heat treatment.
Machining
X5CrNiMo17-12-2 Machining,Our production completely according to the X5CrNiMo17-12-2 standards to meet the X5CrNiMo17-12-2 Machining, can also according to the customer request, to meet the requirements of customers of X5CrNiMo17-12-2 Machining.
Welding performance
X5CrNiMo17-12-2 Welding performance,Our production completely according to the X5CrNiMo17-12-2 standards to meet the X5CrNiMo17-12-2 Welding performance, can also according to the customer request, to meet the requirements of customers of X5CrNiMo17-12-2 Welding performance.
Related hot word search: round bar X5CrNiMo17-12-2,forging X5CrNiMo17-12-2,X5CrNiMo17-12-2 sheet,coil X5CrNiMo17-12-2,X5CrNiMo17-12-2 flat bar,pipe X5CrNiMo17-12-2,X5CrNiMo17-12-2 Lrregular
Prev:X2CrNiN23-4
Next:X2CrNiMo17-12-2