- Steel CRV round bar
- Steel CRV forging
- Steel CRV sheet
- Steel CRV flat bar
- Steel CRV pipe
Steel CRV
Production specification
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Steel CRV
Chemical Composition (in weight %)
C | Si | Mn | Cr | Mo | Ni | V | W | Others |
1.00 | 0.50 | 0.30 | 10.00 | 1.05 | - | 0.25 | - | - |
Description
This steel is in the category generally labeled as alloyed cold work steel/" target="_blank" class="keylink">tool steel. High hardness, toughness and wear resistance.
Applications
Steel for industrial machine knives, cutting tools and woodworking.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.70
Soft Annealing
Heat to 840-870oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 250.
Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 650oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening
Harden from a temperature of 1000-1020oC followed by air or oil quenching. Hardness after quenching is 59-61 HRC (air), 61-63 HRC (oil).
Tempering
Tempering temperature: 150-550oC. Hardness after tempering is 55-61 HRC.
Tempering Diagram
Click the image to enlarge the diagram.
Forging
Hot forming temperature: 1050-850oC.
Machinability
No data.
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search:Steel CRV round bar Steel CRV,forging Steel CRV,Steel CRV sheet,coil Steel CRV,Steel CRV flat bar,pipe Steel CRV,Steel CRV Lrregular
Prev:Steel OCR12SP (Mat.No. 1.2436, DIN X210CrW12)
Next:1.2376, DIN X96CrMoV12