Home > Tool Steel > 1.2363, DIN X100CrMoV5-1, AISI A2

1.2363, DIN X100CrMoV5-1, AISI A2

We can produce 1.2363, DIN X100CrMoV5-1, AISI A2 stainless steel round rods, 1.2363, DIN X100CrMoV5-1, AISI A2 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.2363, DIN X100CrMoV5-1, AISI A2 chemical composition and 1.2363, DIN X100CrMoV5-1, AISI A2 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

1.2363, DIN X100Cr MoV5-1, AISI A2

Designation by Standards

Brand Name	LH No.	Mat. No.	DIN	EN	AISI
OA2	860	1.2363	X100Cr MoV5-1	-	A2

Chemical Composition (in weight %)

C	Si	Mn	Cr	Mo	Ni	V	W	Others
1.00	0.25	0.60	5.15	1.05	-	0.20	-	-

Description
This alloy is one of the cold work, medium air hardening type steel/" target="_blank" class="keylink">tool steels. It contains chromium and molybdenum with a relatively high (1 %) carbon content and is capable of deep hardening from air quench so as to minimize distortion.

Applications
Used of die shapes, slitters, cutting, stamping, injection tools and similar applications where wear resistance is important

Physical properties (avarage values) at ambient temperature
Density [g/cm³]: 7.70
Thermal conductivity [W/m.K]: 26.0

Coefficient of Linear Thermal Expansion 10^-6 ^oC^-1

20-100^oC	20-200^oC	20-300^oC	20-400^oC	20-500^oC	20-600^oC	20-700^oC
11.7	12.9	13.3	13.8	14.2	14.6	14.9

Continuous Cooling Transformation (CCT) Diagram

Time-Temperature Transformation (TTT) Diagram

Click the image to enlarge the diagram.

Soft Annealing
Heat to 800-840^oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 230.

Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 650^oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

Hardening
Harden from a temperature of 930-970^oC followed by air, oil, warm bath (500-550^oC) quenching. Hardness after quenching is 63 HRC.

Tempering
Tempering temperature: 150-550^oC

Tempering Temperature (^oC) vs. Hardness (HRC)

100^oC	200^oC	300^oC	400^oC	500^oC	600^oC	700^oC
63	62	58	57	57	51	36

Tempering Diagram

Forging
Hot forming temperature: 1050-850^oC.

Machinability
Machinability is medium, about 85 % that of the W group of steel/" target="_blank" class="keylink">tool steels which are rated at 100% for a baseline.

Corrosion Resistance
Corrosion resistance of this alloy is better than that of plain carbon steels. However it will rust unless given protective treatment.

Welding
This is an steel/" target="_blank" class="keylink">alloy steel and thus capable of being welded. Consult the alloy supplier for welding procedures.

Mechanical properties

1.2363, DIN X100CrMoV5-1, AISI A2 Mechanical properties,Our production completely according to the 1.2363, DIN X100CrMoV5-1, AISI A2 standards to meet the 1.2363, DIN X100CrMoV5-1, AISI A2 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.2363, DIN X100CrMoV5-1, AISI A2 mechanical properties.

Heat treatment

1.2363, DIN X100CrMoV5-1, AISI A2 Heat treatment,Our production completely according to the 1.2363, DIN X100CrMoV5-1, AISI A2 standards to meet the 1.2363, DIN X100CrMoV5-1, AISI A2 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.2363, DIN X100CrMoV5-1, AISI A2 Heat treatment.

Machining

1.2363, DIN X100CrMoV5-1, AISI A2 Machining,Our production completely according to the 1.2363, DIN X100CrMoV5-1, AISI A2 standards to meet the 1.2363, DIN X100CrMoV5-1, AISI A2 Machining, can also according to the customer request, to meet the requirements of customers of 1.2363, DIN X100CrMoV5-1, AISI A2 Machining.

Welding performance

1.2363, DIN X100CrMoV5-1, AISI A2 Welding performance,Our production completely according to the 1.2363, DIN X100CrMoV5-1, AISI A2 standards to meet the 1.2363, DIN X100CrMoV5-1, AISI A2 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.2363, DIN X100CrMoV5-1, AISI A2 Welding performance.

Prev:1.2690
Next:1.2080, DIN X210Cr12, AISI D3