• 1.2201, DIN X165CrV12 round bar
  • 1.2201, DIN X165CrV12 forging
  • 1.2201, DIN X165CrV12 sheet
  • 1.2201, DIN X165CrV12 flat bar
  • 1.2201, DIN X165CrV12 pipe
Home > Tool Steel > 1.2201, DIN X165CrV12

1.2201, DIN X165CrV12

We can produce 1.2201, DIN X165CrV12 stainless steel round rods, 1.2201, DIN X165CrV12 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.2201, DIN X165CrV12 chemical composition and 1.2201, DIN X165CrV12 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

1.2201, DIN X165CrV12

Designation by Standards

Brand Name LH No. Mat. No. DIN EN AISI
OH842 812 1.2201 X165CrV12 - -

Chemical Composition (in weight %)

C Si Mn Cr Mo Ni V W Others
1.65 0.32 0.40 11.50 - - 0.10 - -

Description
Ledeburitic cold work steel/" target="_blank" class="keylink">tool steel with high wear resistance and good toughness.

Applications
Cutting and die tools, saw rolls, etc. 

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210 
Density [g/cm3]: 7.80

Continuous Cooling Transformation (CCT) Diagram

Time-Temperature Transformation (TTT) Diagram


Click the image to enlarge the diagram.

Soft Annealing
Heat to 820-850oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 250.

Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to about 650oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

Hardening
Harden from a temperature of 960-980oC followed by oil quenching or warm bath quenching 350-400oC. Hardness after quenching is approx.. 63 HRC.

Tempering
Tempering temperature: See the data bellow.

Tempering Temperature (oC) vs. Hardness (HRC)

20oC 100oC 200oC 300oC 400oC 500oC 550oC 600oC
65 64.5 60.5 58.5 56 51 44 39

Tempering Diagram

Forging
Hot forming temperature: 1050-850oC. 

Machinability
No data.
  

Mechanical properties

1.2201, DIN X165CrV12 Mechanical properties,Our production completely according to the 1.2201, DIN X165CrV12 standards to meet the 1.2201, DIN X165CrV12 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.2201, DIN X165CrV12 mechanical properties.

Heat treatment

1.2201, DIN X165CrV12 Heat treatment,Our production completely according to the 1.2201, DIN X165CrV12 standards to meet the 1.2201, DIN X165CrV12 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.2201, DIN X165CrV12 Heat treatment.

Machining

1.2201, DIN X165CrV12 Machining,Our production completely according to the 1.2201, DIN X165CrV12 standards to meet the 1.2201, DIN X165CrV12 Machining, can also according to the customer request, to meet the requirements of customers of 1.2201, DIN X165CrV12 Machining.

Welding performance

1.2201, DIN X165CrV12 Welding performance,Our production completely according to the 1.2201, DIN X165CrV12 standards to meet the 1.2201, DIN X165CrV12 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.2201, DIN X165CrV12 Welding performance.

Related hot word search:1.2201 DIN X165CrV12 round bar 1.2201, DIN X165CrV12,forging 1.2201, DIN X165CrV12,1.2201, DIN X165CrV12 sheet,coil 1.2201, DIN X165CrV12,1.2201, DIN X165CrV12 flat bar,pipe 1.2201, DIN X165CrV12,1.2201, DIN X165CrV12 Lrregular

Prev:1.2767, DIN X45NiCrMo4
Next:1.2746, DIN 45NiCrMoV16-6