- 1.2369, DIN 81MoCrV42-16 round bar
- 1.2369, DIN 81MoCrV42-16 forging
- 1.2369, DIN 81MoCrV42-16 sheet
- 1.2369, DIN 81MoCrV42-16 flat bar
- 1.2369, DIN 81MoCrV42-16 pipe
1.2369, DIN 81MoCrV42-16
We can produce 1.2369, DIN 81MoCrV42-16 stainless steel round rods, 1.2369, DIN 81MoCrV42-16 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.2369, DIN 81MoCrV42-16 chemical composition and 1.2369, DIN 81MoCrV42-16 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.2369, DIN 81MoCrV42-16
Designation by Standards
| Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
| OH260 | 260 | 1.2369 | 81MoCrV42-16 | - | - |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.81 | max. 0.35 | max. 0.35 | 4.00 | 4.25 | - | 1.00 | - | - |
Description
Cold work steel/" target="_blank" class="keylink">tool steel with high hardness and wear resistance.
Applications
Cutting and punching dies.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.70
Continuous Cooling Transformation (CCT) Diagram
Soft Annealing
Heat to 800-840oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 250.
Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to approx. 650oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening
Harden from a temperature of 1070-1100oC followed by oil quenching or warm bath quenching 450-500oC. Hardness after quenching is 63 HRC.
Tempering
Tempering temperature: See the data bellow.
Tempering Temperature (oC) vs. Hardness (HRC)
| 100oC | 200oC | 250oC | 300oC | 350oC | 400oC | 450oC | 500oC | 550oC | 600oC | 650oC |
| 62 | 61.5 | 61 | 58.5 | 57.5 | 58 | 60 | 61.5 | 63 | 62 | 54 |
Tempering Diagram
Forging
Hot forming temperature: 1050-850oC.
Machinability
No data.
Mechanical properties
1.2369, DIN 81MoCrV42-16 Mechanical properties,Our production completely according to the 1.2369, DIN 81MoCrV42-16 standards to meet the 1.2369, DIN 81MoCrV42-16 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.2369, DIN 81MoCrV42-16 mechanical properties.
Heat treatment
1.2369, DIN 81MoCrV42-16 Heat treatment,Our production completely according to the 1.2369, DIN 81MoCrV42-16 standards to meet the 1.2369, DIN 81MoCrV42-16 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.2369, DIN 81MoCrV42-16 Heat treatment.
Machining
1.2369, DIN 81MoCrV42-16 Machining,Our production completely according to the 1.2369, DIN 81MoCrV42-16 standards to meet the 1.2369, DIN 81MoCrV42-16 Machining, can also according to the customer request, to meet the requirements of customers of 1.2369, DIN 81MoCrV42-16 Machining.
Welding performance
1.2369, DIN 81MoCrV42-16 Welding performance,Our production completely according to the 1.2369, DIN 81MoCrV42-16 standards to meet the 1.2369, DIN 81MoCrV42-16 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.2369, DIN 81MoCrV42-16 Welding performance.
Related hot word search:1.2369 DIN 81MoCrV42-16 round bar 1.2369, DIN 81MoCrV42-16,forging 1.2369, DIN 81MoCrV42-16,1.2369, DIN 81MoCrV42-16 sheet,coil 1.2369, DIN 81MoCrV42-16,1.2369, DIN 81MoCrV42-16 flat bar,pipe 1.2369, DIN 81MoCrV42-16,1.2369, DIN 81MoCrV42-16 Lrregular
Prev:1.2357, DIN 50CrMoV13-1, AISI S7
Next:1.4122, DIN X39CrMo17-1