- 1.2362, DIN X63CrMoV51 round bar
- 1.2362, DIN X63CrMoV51 forging
- 1.2362, DIN X63CrMoV51 sheet
- 1.2362, DIN X63CrMoV51 flat bar
- 1.2362, DIN X63CrMoV51 pipe
1.2362, DIN X63CrMoV51
We can produce 1.2362, DIN X63CrMoV51 stainless steel round rods, 1.2362, DIN X63CrMoV51 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.2362, DIN X63CrMoV51 chemical composition and 1.2362, DIN X63CrMoV51 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.2362, DIN X63CrMoV51
Designation by Standards
| Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
| OV266 | 266 | 1.2362 | X63CrMoV51 | - | - |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.63 | 1.10 | 0.40 | 5.25 | 1.0 | 0.30 | - | - | - |
Description
Cr-Mo alloyed through hardening steel with high tempering resistance.
Applications
Intermediate rolls for cluster mills, trimming dies, hot cutting shears.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.81
Continuous Cooling Transformation (CCT) Diagram
Soft Annealing
Heat to 800-840oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 250.
Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 600-650oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening
Harden from a temperature of 980-1020oC followed by oil quenching or warm bath quenching. Hardness after quenching is 61-63 HRC.
Tempering
Tempering temperature: See the data bellow.
Tempering Temperature (oC) vs. Hardness (HRC)
| 100oC | 200oC | 300oC | 400oC | 500oC | 550oC |
| 61 | 59 | 58 | 57 | 61 | 58 |
Tempering Diagram
Forging
Hot forming temperature: 1100-850oC.
Machinability
No data.
Mechanical properties
1.2362, DIN X63CrMoV51 Mechanical properties,Our production completely according to the 1.2362, DIN X63CrMoV51 standards to meet the 1.2362, DIN X63CrMoV51 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.2362, DIN X63CrMoV51 mechanical properties.
Heat treatment
1.2362, DIN X63CrMoV51 Heat treatment,Our production completely according to the 1.2362, DIN X63CrMoV51 standards to meet the 1.2362, DIN X63CrMoV51 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.2362, DIN X63CrMoV51 Heat treatment.
Machining
1.2362, DIN X63CrMoV51 Machining,Our production completely according to the 1.2362, DIN X63CrMoV51 standards to meet the 1.2362, DIN X63CrMoV51 Machining, can also according to the customer request, to meet the requirements of customers of 1.2362, DIN X63CrMoV51 Machining.
Welding performance
1.2362, DIN X63CrMoV51 Welding performance,Our production completely according to the 1.2362, DIN X63CrMoV51 standards to meet the 1.2362, DIN X63CrMoV51 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.2362, DIN X63CrMoV51 Welding performance.
Related hot word search:1.2362 DIN X63CrMoV51 round bar 1.2362, DIN X63CrMoV51,forging 1.2362, DIN X63CrMoV51,1.2362, DIN X63CrMoV51 sheet,coil 1.2362, DIN X63CrMoV51,1.2362, DIN X63CrMoV51 flat bar,pipe 1.2362, DIN X63CrMoV51,1.2362, DIN X63CrMoV51 Lrregular