Home > Tool Steel > 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A

1.2885, DIN X32CrMoCoV3-3-3, AISI H10A

We can produce 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A stainless steel round rods, 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A chemical composition and 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

1.2885, DIN X32Cr MoCoV3-3-3, AISI H10A

Designation by Standards

Brand Name	LH No.	Mat. No.	DIN	EN	AISI
UTOPCO2	861	1.2885	X32Cr MoCoV3-3-3	-	H10A

Chemical Composition (in weight %)

C	Si	Mn	Cr	Mo	Ni	V	W	Others
0.32	0.25	0.30	2.95	2.80	-	0.55	-	2.75 % Co

Description
This alloy is on of the hot work, cobalt containing steel/" target="_blank" class="keylink">tool steel.

Applications
Hot pressing tools exposed to severe stresses in contact with the die insert - mandrels, stamps, punching tools, dies, etc.

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [10³ x N/mm²]: 210
Density [g/cm³]: 7.88

Coefficient of Linear Thermal Expansion 10^-6 ^oC^-1

20-100^oC	20-200^oC	20-300^oC	20-400^oC	20-500^oC	20-600^oC	20-700^oC
12.1	12.1	12.4	12.9	13.5	14.0	14.1

Soft Annealing
Heat to 800-840^oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 250.

Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 650^oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

Hardening
Harden from a temperature of 1020-1060^oC followed by oil, air or warm bath quenching. Hardness after quenching is 49-53 HRC.

Tempering
Tempering temperature: See the table and diagram bellow.

Tempering Temperature (^oC) vs. Hardness (HRC)

400^oC	500^oC	550^oC	600^oC	650^oC	700^oC
49	50	51	50	44	37

Tempering Diagram

Forging
Hot forming temperature: 1100-990^oC.

Machinability
No data.

Mechanical properties

1.2885, DIN X32CrMoCoV3-3-3, AISI H10A Mechanical properties,Our production completely according to the 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A standards to meet the 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A mechanical properties.

Heat treatment

1.2885, DIN X32CrMoCoV3-3-3, AISI H10A Heat treatment,Our production completely according to the 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A standards to meet the 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A Heat treatment.

Machining

1.2885, DIN X32CrMoCoV3-3-3, AISI H10A Machining,Our production completely according to the 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A standards to meet the 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A Machining, can also according to the customer request, to meet the requirements of customers of 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A Machining.

Welding performance

1.2885, DIN X32CrMoCoV3-3-3, AISI H10A Welding performance,Our production completely according to the 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A standards to meet the 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A Welding performance, can also according to the customer request, to meet the requirements of customers of 1.2885, DIN X32CrMoCoV3-3-3, AISI H10A Welding performance.

Prev:1.2662, DIN X30WCrCoV9-3
Next:1.2838, DIN 145V33