- 1.2833, DIN 100V1, AISI W2 round bar
- 1.2833, DIN 100V1, AISI W2 forging
- 1.2833, DIN 100V1, AISI W2 sheet
- 1.2833, DIN 100V1, AISI W2 flat bar
- 1.2833, DIN 100V1, AISI W2 pipe
1.2833, DIN 100V1, AISI W2
We can produce 1.2833, DIN 100V1, AISI W2 stainless steel round rods, 1.2833, DIN 100V1, AISI W2 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.2833, DIN 100V1, AISI W2 chemical composition and 1.2833, DIN 100V1, AISI W2 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.2833, DIN 100V1, AISI W2
Designation by Standards
| Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
| OC100ES | 651 | 1.2833 | 100V1 | - | W2 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 1.05 | 0.20 | 0.25 | - | - | - | 0.15 | - | - |
Description
Low alloyed water-hardening steel/" target="_blank" class="keylink">tool steel.
Applications
Cold working tools for steels and metals when hard surface and tough core are demand; tap drills, dies, broaching tools, stone working tools.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 190-210
Density [g/cm3]: 7.85
Thermal conductivity [W/m.K]: 14.4
Electric resistivity [Ohm mm2/m]: 0.20
Specific heat capacity[J/g.K]: 0.46
Soft Annealing
Heat to 680-720oC, cool slowly. This will produce a maximum Brinell hardness of 213.
Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to approx. 600-650oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening
Harden from a temperature of 760-800oC followed by water quenching. Hardness after quenching is 65 HRC.
Tempering
Tempering temperature: 100-200oC.
Forging
Hot forming temperature: 1000-800oC.
Machinability
No data.
Corrosion Resistance
Corrosion resistance of this alloy is better than that of plain carbon steels. However it will rust unless given protective treatment.
Mechanical properties
1.2833, DIN 100V1, AISI W2 Mechanical properties,Our production completely according to the 1.2833, DIN 100V1, AISI W2 standards to meet the 1.2833, DIN 100V1, AISI W2 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.2833, DIN 100V1, AISI W2 mechanical properties.
Heat treatment
1.2833, DIN 100V1, AISI W2 Heat treatment,Our production completely according to the 1.2833, DIN 100V1, AISI W2 standards to meet the 1.2833, DIN 100V1, AISI W2 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.2833, DIN 100V1, AISI W2 Heat treatment.
Machining
1.2833, DIN 100V1, AISI W2 Machining,Our production completely according to the 1.2833, DIN 100V1, AISI W2 standards to meet the 1.2833, DIN 100V1, AISI W2 Machining, can also according to the customer request, to meet the requirements of customers of 1.2833, DIN 100V1, AISI W2 Machining.
Welding performance
1.2833, DIN 100V1, AISI W2 Welding performance,Our production completely according to the 1.2833, DIN 100V1, AISI W2 standards to meet the 1.2833, DIN 100V1, AISI W2 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.2833, DIN 100V1, AISI W2 Welding performance.
Related hot word search:1.2833 DIN 100V1 AISI W2 round bar 1.2833, DIN 100V1, AISI W2,forging 1.2833, DIN 100V1, AISI W2,1.2833, DIN 100V1, AISI W2 sheet,coil 1.2833, DIN 100V1, AISI W2,1.2833, DIN 100V1, AISI W2 flat bar,pipe 1.2833, DIN 100V1, AISI W2,1.2833, DIN 100V1, AISI W2 Lrregular
Prev:1.1545, DIN C105W1, AISI W1
Next:1.1563, DIN C125W, AISI W1