Home > Tool Steel > 1.3505, DIN 100Cr6, AISI 5210

1.3505, DIN 100Cr6, AISI 5210

We can produce 1.3505, DIN 100Cr6, AISI 5210 stainless steel round rods, 1.3505, DIN 100Cr6, AISI 5210 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.3505, DIN 100Cr6, AISI 5210 chemical composition and 1.3505, DIN 100Cr6, AISI 5210 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

1.3505, DIN 100Cr6, AISI 5210

Designation by Standards

Brand Name	LH No.	Mat. No.	DIN	EN	AISI
OCR4ES	810	1.3505	100Cr6	100Cr6	5210

Chemical Composition (in weight %)

C	Si	Mn	Cr	Mo	Ni	V	W	Others
0.97	0.25	0.35	1.50	-	max. 0.30-	-	-	Cu max. 0.30

Description
52100 is a high carbon, chromium containing low steel/" target="_blank" class="keylink">alloy steel that is through hardening and noted in particular for use as bearings.

Applications
Principal applications are those for bearings in rotating machinery. Balls, rollers and rings for roller bearings, diameter up to 30 mm.

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [10³ x N/mm²]: 190-210
Density [g/cm³]: 7.83
Thermal conductivity [W/m.K]: 20.0
Electric resistivity [Ohm mm²/m]: 0.65
Specific heat capacity[J/g.K]: 0.46

Soft Annealing
Heat to 760-800^oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 207.

Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 650^oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

Hardening
Harden from a temperature of 830-870^oC followed by oil quenching. Hardness after quenching is 64 HRC.

Tempering
Tempering temperature: 150-180^oC.

Forging
Hot forming temperature: 1200-926^oC.

Machinability
Machinability of 52100 alloy is good by conventional methods. A spherodizing anneal at 1200 F before machining will improve the overall machinability of the alloy.

Welding
This is a high carbon alloy typically used in bearing applications where welding is not applicable or appropriate.

Mechanical properties

1.3505, DIN 100Cr6, AISI 5210 Mechanical properties,Our production completely according to the 1.3505, DIN 100Cr6, AISI 5210 standards to meet the 1.3505, DIN 100Cr6, AISI 5210 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.3505, DIN 100Cr6, AISI 5210 mechanical properties.

Heat treatment

1.3505, DIN 100Cr6, AISI 5210 Heat treatment,Our production completely according to the 1.3505, DIN 100Cr6, AISI 5210 standards to meet the 1.3505, DIN 100Cr6, AISI 5210 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.3505, DIN 100Cr6, AISI 5210 Heat treatment.

Machining

1.3505, DIN 100Cr6, AISI 5210 Machining,Our production completely according to the 1.3505, DIN 100Cr6, AISI 5210 standards to meet the 1.3505, DIN 100Cr6, AISI 5210 Machining, can also according to the customer request, to meet the requirements of customers of 1.3505, DIN 100Cr6, AISI 5210 Machining.

Welding performance

1.3505, DIN 100Cr6, AISI 5210 Welding performance,Our production completely according to the 1.3505, DIN 100Cr6, AISI 5210 standards to meet the 1.3505, DIN 100Cr6, AISI 5210 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.3505, DIN 100Cr6, AISI 5210 Welding performance.

Prev:1.2210, DIN 115CrV3, AISI L2
Next:1.2067, DIN 100Cr6, AISI L1/L3