- 1.2067, DIN 100Cr6, AISI L1/L3 round bar
- 1.2067, DIN 100Cr6, AISI L1/L3 forging
- 1.2067, DIN 100Cr6, AISI L1/L3 sheet
- 1.2067, DIN 100Cr6, AISI L1/L3 flat bar
- 1.2067, DIN 100Cr6, AISI L1/L3 pipe
1.2067, DIN 100Cr6, AISI L1/L3
We can produce 1.2067, DIN 100Cr6, AISI L1/L3 stainless steel round rods, 1.2067, DIN 100Cr6, AISI L1/L3 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.2067, DIN 100Cr6, AISI L1/L3 chemical composition and 1.2067, DIN 100Cr6, AISI L1/L3 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.2067, DIN 100Cr6, AISI L1/L3
Designation by Standards
| Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
| OCR4EX | 809 | 1.2067 | 100Cr6 | - | L1/L3 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 1.02 | 0.25 | 0.33 | 1.50 | - | - | - | - | L3 |
Description
Medium alloy, oil-hardening tooling steel, which is hard-wearing.
Applications
Mould, wood and paper processing tools, slitting blades, tobacco blades.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.85
Soft Annealing
Heat to 720-750oC, cool slowlyin furnace to <550oC, then air. This will produce a maximum Brinell hardness of 225.
Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to approx. 650oC, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening
Harden from a temperature of 790-820oC, 820-860oC followed by water or oil quenching. Hardness after quenching is 63-67, 63-66 HRC.
Tempering
Tempering temperature: 150-300oC. Hardness after tempering is 56-65 HRC.
Tempering Temperature (oC) vs. Hardness (HRC)
| 100oC | 200oC | 300oC | 400oC | 500oC | 600oC |
| 64.5 | 60.5 | 58 | 53 | 45 | 35 |
Tempering Diagram
Forging
Hot forming temperature: 1050-850oC.
Machinability
No data.
Corrosion Resistance
This is an steel/" target="_blank" class="keylink">alloy steel and it is not corrosion resistant. It will rust unless protected.
Mechanical properties
1.2067, DIN 100Cr6, AISI L1/L3 Mechanical properties,Our production completely according to the 1.2067, DIN 100Cr6, AISI L1/L3 standards to meet the 1.2067, DIN 100Cr6, AISI L1/L3 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.2067, DIN 100Cr6, AISI L1/L3 mechanical properties.
Heat treatment
1.2067, DIN 100Cr6, AISI L1/L3 Heat treatment,Our production completely according to the 1.2067, DIN 100Cr6, AISI L1/L3 standards to meet the 1.2067, DIN 100Cr6, AISI L1/L3 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.2067, DIN 100Cr6, AISI L1/L3 Heat treatment.
Machining
1.2067, DIN 100Cr6, AISI L1/L3 Machining,Our production completely according to the 1.2067, DIN 100Cr6, AISI L1/L3 standards to meet the 1.2067, DIN 100Cr6, AISI L1/L3 Machining, can also according to the customer request, to meet the requirements of customers of 1.2067, DIN 100Cr6, AISI L1/L3 Machining.
Welding performance
1.2067, DIN 100Cr6, AISI L1/L3 Welding performance,Our production completely according to the 1.2067, DIN 100Cr6, AISI L1/L3 standards to meet the 1.2067, DIN 100Cr6, AISI L1/L3 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.2067, DIN 100Cr6, AISI L1/L3 Welding performance.
Related hot word search:1.2067 DIN 100Cr6 AISI L1/L3 round bar 1.2067, DIN 100Cr6, AISI L1/L3,forging 1.2067, DIN 100Cr6, AISI L1/L3,1.2067, DIN 100Cr6, AISI L1/L3 sheet,coil 1.2067, DIN 100Cr6, AISI L1/L3,1.2067, DIN 100Cr6, AISI L1/L3 flat bar,pipe 1.2067, DIN 100Cr6, AISI L1/L3,1.2067, DIN 100Cr6, AISI L1/L3 Lrregular
Prev:1.3505, DIN 100Cr6, AISI 5210
Next:AISI S5