• 1.2714, DIN 56NiCrMoV7 round bar
  • 1.2714, DIN 56NiCrMoV7 forging
  • 1.2714, DIN 56NiCrMoV7 sheet
  • 1.2714, DIN 56NiCrMoV7 flat bar
  • 1.2714, DIN 56NiCrMoV7 pipe
Home > Tool Steel > 1.2714, DIN 56NiCrMoV7

1.2714, DIN 56NiCrMoV7

We can produce 1.2714, DIN 56NiCrMoV7 stainless steel round rods, 1.2714, DIN 56NiCrMoV7 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.2714, DIN 56NiCrMoV7 chemical composition and 1.2714, DIN 56NiCrMoV7 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

1.2714, DIN 56NiCrMoV7 

Designation by Standards

Brand Name LH No. Mat. No. DIN EN AISI
UTOPEX2 854 1.2714 56NiCrMoV7 55CrMo8 -

Chemical Composition (in weight %)

C Si Mn Cr Mo Ni V W Others
0.55 0.25 0.75 1.10 0.45 1.65 0.10 - -

Description
Nickel hot work steel/" target="_blank" class="keylink">tool steel with good hardenability. Uniform hardness over section also at great dimensions. Resistance under impact loadings. Very good strength and thougness. Good tempering resistance and dimensional stability. Tools can be water or air cooled.

Applications
Forging tools, dies of all sorts, shapes and sizes, hot forging and pressing tools for steel and metal. Moulds, bushings, piercers etc. 

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 215 
Density [g/cm3]: 7.84
Thermal conductivity [W/m.K]: 36.0 
Electric resistivity [Ohm mm2/m]: 0.30
Specific heat capacity[J/g.K]: 0.46

Thermal conductivity [W/m.K]

20oC 500oC 600oC
36.0 36.8 36.0

Electric resistivity [Ohm mm2/m]

20oC 500oC 600oC
0.30 0.70 0.84

Specific heat capacity[J/g.K]

20oC 500oC 600oC
0.46 0.55 0.59

Coefficient of Linear Thermal Expansion 10-6 oC-1

20-100oC 20-200oC 20-300oC 20-400oC 20-500oC 20-600oC 20-700oC
11.7 12.1 13.0 13.5 14.0 14.3 14.6

Continuous Cooling Transformation (CCT) Diagram

Soft Annealing
Heat to 650-700oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 248.

Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 650oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

Hardening
Oil: Harden from a temperature of 830-870oC followed by oil quenching. Hardness after quenching is 58 HRC.
Air: Harden from a temperature of 830-900oC followed by air quenching. Hardness after quenching is 56 HRC. 

Tempering
Tempering temperature: See the data bellow.

Quenching in oil:
Tempering Temperature (oC) vs. Hardness (HRC)vvs. Hardness (HRC) vs. Tensile Stregth (N/mm2)

100oC 200oC 300oC 400oC 450oC 500oC 550oC 600oC 650oC
57 55 52 49 47 45 42.5 39 35
2140 1980 1790 1620 1530 1440 1345 1230 1110

Quenching in air:
Tempering Temperature (oC) vs. Hardness (HRC) vs. Hardness (HRC) vs. Tensile Stregth (N/mm2)

100oC 200oC 300oC 400oC 450oC 500oC 550oC 600oC 650oC
55 53 50 47 45 43 40 37 32
1980 1845 1680 1530 1440 1360 1260 1170 1020

Tempering Diagram

Diagram Tempering Temperature - Mechanical Properties

Diagram Tempering Temperature - Mechanical Properties

Forging
Hot forming temperature: 1050-850oC. 

Machinability
The machinability rating of D3 is roughly 25 % that of free machining carbon steel 1018. Due to its abrasion resistant nature, machining in the hardened condition should be limited to finish grinding.
  

Mechanical properties

1.2714, DIN 56NiCrMoV7 Mechanical properties,Our production completely according to the 1.2714, DIN 56NiCrMoV7 standards to meet the 1.2714, DIN 56NiCrMoV7 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.2714, DIN 56NiCrMoV7 mechanical properties.

Heat treatment

1.2714, DIN 56NiCrMoV7 Heat treatment,Our production completely according to the 1.2714, DIN 56NiCrMoV7 standards to meet the 1.2714, DIN 56NiCrMoV7 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.2714, DIN 56NiCrMoV7 Heat treatment.

Machining

1.2714, DIN 56NiCrMoV7 Machining,Our production completely according to the 1.2714, DIN 56NiCrMoV7 standards to meet the 1.2714, DIN 56NiCrMoV7 Machining, can also according to the customer request, to meet the requirements of customers of 1.2714, DIN 56NiCrMoV7 Machining.

Welding performance

1.2714, DIN 56NiCrMoV7 Welding performance,Our production completely according to the 1.2714, DIN 56NiCrMoV7 standards to meet the 1.2714, DIN 56NiCrMoV7 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.2714, DIN 56NiCrMoV7 Welding performance.

Related hot word search:1.2714 DIN 56NiCrMoV7 round bar 1.2714, DIN 56NiCrMoV7,forging 1.2714, DIN 56NiCrMoV7,1.2714, DIN 56NiCrMoV7 sheet,coil 1.2714, DIN 56NiCrMoV7,1.2714, DIN 56NiCrMoV7 flat bar,pipe 1.2714, DIN 56NiCrMoV7,1.2714, DIN 56NiCrMoV7 Lrregular

Prev:1.2713, DIN 55NiCrMoV6, AISI L6
Next:1.2312, DIN 40CrMnMoS8-6