- 11.3333, DIN S3-3-2 round bar
- 11.3333, DIN S3-3-2 forging
- 11.3333, DIN S3-3-2 sheet
- 11.3333, DIN S3-3-2 flat bar
- 11.3333, DIN S3-3-2 pipe
11.3333, DIN S3-3-2
We can produce 11.3333, DIN S3-3-2 stainless steel round rods, 11.3333, DIN S3-3-2 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 11.3333, DIN S3-3-2 chemical composition and 11.3333, DIN S3-3-2 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
11.3333, DIN S3-3-2
Designation by Standards
| Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
| BRM | 878 | 1.3333 | S3-3-2 | HS 3-3-2 | - |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.99 | max. 0.45 | max. 0.40 | 4.15 | 2.70 | - | 2.35 | 2.85 | - |
Description
Economical high speed steel for medium life times. The steel has high toughness properties and is suitable for tools which are exposed to knocks and bumps.
Applications
In the metal plating sector, metal circular saw blades, long saw blades and blades for wood machining are manufactured from this steel as a matter of preference.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 8.0
Thermal conductivity [W/m.K]: 20.0
Electric resistivity [Ohm mm2/m]: 0.65
Specific heat capacity[J/g.K]: 0.46
Soft Annealing
Heat to 780-820oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 255.
Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 600-650oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening
Harden from a temperature of 1170-1220oC followed by oil or air quenching or warm bath 550-220oC.
Tempering
Tempering temperature: 520-550oC, at least 2x for at least 62 HRC.
Forging
Hot forming temperature: 1150-900oC.
Mechanical properties
11.3333, DIN S3-3-2 Mechanical properties,Our production completely according to the 11.3333, DIN S3-3-2 standards to meet the 11.3333, DIN S3-3-2 mechanical performance, can also according to the customer request, to meet the requirements of customers of 11.3333, DIN S3-3-2 mechanical properties.
Heat treatment
11.3333, DIN S3-3-2 Heat treatment,Our production completely according to the 11.3333, DIN S3-3-2 standards to meet the 11.3333, DIN S3-3-2 Heat treatment, can also according to the customer request, to meet the requirements of customers of 11.3333, DIN S3-3-2 Heat treatment.
Machining
11.3333, DIN S3-3-2 Machining,Our production completely according to the 11.3333, DIN S3-3-2 standards to meet the 11.3333, DIN S3-3-2 Machining, can also according to the customer request, to meet the requirements of customers of 11.3333, DIN S3-3-2 Machining.
Welding performance
11.3333, DIN S3-3-2 Welding performance,Our production completely according to the 11.3333, DIN S3-3-2 standards to meet the 11.3333, DIN S3-3-2 Welding performance, can also according to the customer request, to meet the requirements of customers of 11.3333, DIN S3-3-2 Welding performance.
Related hot word search:11.3333 DIN S3-3-2 round bar 11.3333, DIN S3-3-2,forging 11.3333, DIN S3-3-2,11.3333, DIN S3-3-2 sheet,coil 11.3333, DIN S3-3-2,11.3333, DIN S3-3-2 flat bar,pipe 11.3333, DIN S3-3-2,11.3333, DIN S3-3-2 Lrregular
Prev:11.3202, DIN S12-1-4-5, AISI T15
Next:11.3346, DIN S2-9-1, AISI M1