- EN24 EN24T EN24U Carbon Steel round bar
- EN24 EN24T EN24U Carbon Steel forging
- EN24 EN24T EN24U Carbon Steel sheet
- EN24 EN24T EN24U Carbon Steel flat bar
- EN24 EN24T EN24U Carbon Steel pipe
EN24 EN24T EN24U Carbon Steel
Production specification
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
EN24 EN24T EN24U Carbon Steel
EN24 is a high quality, high tensile, steel/" target="_blank" class="keylink">alloy steel . Usually supplied readily machineable in ‘T’ condition, it combines high |
TYPICAL ANALYSIS |
EN24 |
|
|||
C. |
Si. |
Ni. |
Cr. |
Mo. |
|
0.40% |
0.30% |
0.60% |
1.50% |
1.20% |
0.25% |
Hardening:
Heat uniformly to 823/850°C until heated through. Quench in oil.
Tempering:
Heat uniformly and thoroughly at the selected tempering temperature, up to 660°C and hold at heat for two hours per inch of
total thickness. Tempering between 250-375°C in not recommended as this can seriously reduce the steels impact value.
Stress Relieving:
Heat slowly to 650-670°C, soak well before cooling the EN24 tool in a furnace or in air.
Mechanical Properties
Heat |
Tensile |
Yield |
a% on |
Impact |
Impact |
Proof |
Hardness |
Size |
T |
850/1000 |
654 |
13 |
40 |
35 |
635 |
248/302 |
>150≤250
|
T |
850/1000 |
680 |
13 |
54 |
50 |
665 |
248/302 |
>63≤250
|
U |
925/1075 |
755 |
12 |
47 |
54 |
740 |
269/331 |
>29≤100
|
V |
1000/1150 |
850 |
12 |
47 |
42 |
835 |
293/352 |
>13≤63 |
W |
1075/1225 |
940 |
11 |
40 |
35 |
925 |
311/375 |
>6≤29 |
X |
1150/1300 |
1020 |
10 |
34 |
28 |
1005 |
345/401 |
>6≤29 |
Z |
1550 |
1235 |
5 |
10 |
9 |
1125 |
444 |
>6≤29 |
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search:EN24 EN24T EN24U Carbon Steel round bar EN24 EN24T EN24U Carbon Steel,forging EN24 EN24T EN24U Carbon Steel,EN24 EN24T EN24U Carbon Steel sheet,coil EN24 EN24T EN24U Carbon Steel,EN24 EN24T EN24U Carbon Steel flat bar,pipe EN24 EN24T EN24U Carbon Steel,EN24 EN24T EN24U Carbon Steel Lrregular
Prev:EN19 EN19T EN19U Carbon Steel
Next:Steel 45M5S