- 1.0605, DIN C75, AISI 1075 round bar
- 1.0605, DIN C75, AISI 1075 forging
- 1.0605, DIN C75, AISI 1075 sheet
- 1.0605, DIN C75, AISI 1075 flat bar
- 1.0605, DIN C75, AISI 1075 pipe
1.0605, DIN C75, AISI 1075
We can produce 1.0605, DIN C75, AISI 1075 stainless steel round rods, 1.0605, DIN C75, AISI 1075 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.0605, DIN C75, AISI 1075 chemical composition and 1.0605, DIN C75, AISI 1075 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.0605, DIN C75, AISI 1075
Designation by Standards
| Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
| C75 | 523 | 1.0605 | C75 | - | 1075 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.75 | 0.25 | 0.70 | - | - | - | - | - | - |
Description
This is one of the higher carbon steels used for high hardness in the fully hardened condition. In such condition the steel is more brittle than the lower carbon steels.
Applications
Applications include springs and cutting tools.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.85
Soft Annealing
Heat to 925oC, cool slowly.
Hardening
Harden from a temperature of 890oC followed by oil quenching.
Tempering
Tempering temperature: Please ask
Forging
Hot forming temperature: 1100-850oC.
Machinability
The machinability of this steel suffers because of the high carbon content. It rates at 50% that of the AISI 1112 steel that is considered the 100% machinable base reference.
Corrosion Resistance
This is a steel and will rust unless protected. It is not a corrosion resistant alloy.
Welding
C75 is weldable by all of the welding techniques. However it is important to use pre-heat and post-heat practice as given in approved weld procedure, in order to avoid cracking. Pre-heat at 260 to 320oC and post-heat at 650 to 780oC.
Cold working
Cold working of C75 is difficult even in the annealed condition. However it may be done by conventional methods but requires more force than for the low carbon steels.
Mechanical properties
1.0605, DIN C75, AISI 1075 Mechanical properties,Our production completely according to the 1.0605, DIN C75, AISI 1075 standards to meet the 1.0605, DIN C75, AISI 1075 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.0605, DIN C75, AISI 1075 mechanical properties.
Heat treatment
1.0605, DIN C75, AISI 1075 Heat treatment,Our production completely according to the 1.0605, DIN C75, AISI 1075 standards to meet the 1.0605, DIN C75, AISI 1075 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.0605, DIN C75, AISI 1075 Heat treatment.
Machining
1.0605, DIN C75, AISI 1075 Machining,Our production completely according to the 1.0605, DIN C75, AISI 1075 standards to meet the 1.0605, DIN C75, AISI 1075 Machining, can also according to the customer request, to meet the requirements of customers of 1.0605, DIN C75, AISI 1075 Machining.
Welding performance
1.0605, DIN C75, AISI 1075 Welding performance,Our production completely according to the 1.0605, DIN C75, AISI 1075 standards to meet the 1.0605, DIN C75, AISI 1075 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.0605, DIN C75, AISI 1075 Welding performance.
Related hot word search:1.0605 DIN C75 AISI 1075 round bar 1.0605, DIN C75, AISI 1075,forging 1.0605, DIN C75, AISI 1075,1.0605, DIN C75, AISI 1075 sheet,coil 1.0605, DIN C75, AISI 1075,1.0605, DIN C75, AISI 1075 flat bar,pipe 1.0605, DIN C75, AISI 1075,1.0605, DIN C75, AISI 1075 Lrregular
Prev:1.1520, DIN C70, AISI 1070
Next:1.1193, DIN CF45, AISI 1045