• 1.1213, DIN Cf53, AISI 1055 round bar
  • 1.1213, DIN Cf53, AISI 1055 forging
  • 1.1213, DIN Cf53, AISI 1055 sheet
  • 1.1213, DIN Cf53, AISI 1055 flat bar
  • 1.1213, DIN Cf53, AISI 1055 pipe
Home > Carbon Steel > 1.1213, DIN Cf53, AISI 1055

1.1213, DIN Cf53, AISI 1055

We can produce 1.1213, DIN Cf53, AISI 1055 stainless steel round rods, 1.1213, DIN Cf53, AISI 1055 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.1213, DIN Cf53, AISI 1055 chemical composition and 1.1213, DIN Cf53, AISI 1055 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

1.1213, DIN Cf53, AISI 1055

Designation by Standards

 

Brand Name LH No. Mat. No. DIN EN AISI
CF53 625 1.1213 Cf53 - 1055



Chemical Composition (in weight %)

C Si Mn Cr Mo Ni V W Others
0.53 0.25 0.55 - - - - - -



Description
Unalloyed structural carbon steel.

Applications
Steels for superficial hardening: Piston bolts, chain bolts, gear shafts, gear wheels, worms and camshafts.

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.84

Soft Annealing
Heat to 650-700oC, cool slowly. This will produce a maximum Brinell hardness of 223.

Normalizing
Temperature: 830-860oC.

Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 120-200oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

Hardening
Harden from a temperature of 810-845oC followed by oil or water quenching. Hardness after quenching is 57-62 HRC.

Tempering
Tempering temperature: 550-660oC.

Mechanical Properties in Hardened+Tempered Condition

Diameter (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation (%) Reduction (%)
up to 16 510 740-880 12 25
17-40 430 690-830 14 35
41-100 400 640-780 15 40

Forging
Hot forming temperature: 1050-850oC.

Machinability
No data.

Mechanical properties

1.1213, DIN Cf53, AISI 1055 Mechanical properties,Our production completely according to the 1.1213, DIN Cf53, AISI 1055 standards to meet the 1.1213, DIN Cf53, AISI 1055 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.1213, DIN Cf53, AISI 1055 mechanical properties.

Heat treatment

1.1213, DIN Cf53, AISI 1055 Heat treatment,Our production completely according to the 1.1213, DIN Cf53, AISI 1055 standards to meet the 1.1213, DIN Cf53, AISI 1055 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.1213, DIN Cf53, AISI 1055 Heat treatment.

Machining

1.1213, DIN Cf53, AISI 1055 Machining,Our production completely according to the 1.1213, DIN Cf53, AISI 1055 standards to meet the 1.1213, DIN Cf53, AISI 1055 Machining, can also according to the customer request, to meet the requirements of customers of 1.1213, DIN Cf53, AISI 1055 Machining.

Welding performance

1.1213, DIN Cf53, AISI 1055 Welding performance,Our production completely according to the 1.1213, DIN Cf53, AISI 1055 standards to meet the 1.1213, DIN Cf53, AISI 1055 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.1213, DIN Cf53, AISI 1055 Welding performance.

Related hot word search:1.1213 DIN Cf53 AISI 1055 round bar 1.1213, DIN Cf53, AISI 1055,forging 1.1213, DIN Cf53, AISI 1055,1.1213, DIN Cf53, AISI 1055 sheet,coil 1.1213, DIN Cf53, AISI 1055,1.1213, DIN Cf53, AISI 1055 flat bar,pipe 1.1213, DIN Cf53, AISI 1055,1.1213, DIN Cf53, AISI 1055 Lrregular

Prev:1.1223, DIN Cm60, AISI 1060
Next:1.0715, DIN 9SMn28, AISI 1213