Home > Alloy Steel > UNS G23300

UNS G23300

We can produce UNS G23300 stainless steel round rods, UNS G23300 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control UNS G23300 chemical composition and UNS G23300 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

AISI 2330 steel (UNS G23300)
Categories: Metal; Ferrous Metal; Alloy Steel; Low Alloy Steel

Key Words: UNS G23300

Physical Properties	Metric	English	Comments
Density	7.75 g/cc	0.280 lb/in³

Mechanical Properties	Metric	English	Comments
Hardness, Brinell	248	248
Tensile Strength, Ultimate	841 MPa	122000 psi
Tensile Strength, Yield	689 MPa @Strain 0.200 %	99900 psi @Strain 0.200 %
Elongation at Break	19.0 %	19.0 %
Modulus of Elasticity	201 - 209 GPa	29200 - 30300 ksi
Bulk Modulus	160 - 170 GPa	23200 - 24700 ksi
Poissons Ratio	0.270 - 0.300	0.270 - 0.300
Shear Modulus	81.0 - 82.0 GPa	11700 - 11900 ksi

Thermal Properties	Metric	English	Comments
CTE, linear	10.9 µm/m-°C	6.06 µin/in-°F

Users viewing this material also viewed the following:
AISI 2515 steel (UNS G25150)
AISI 3120 steel (UNS G31200)
AISI 3140
AISI 4063 steel (UNS G40630)
AISI 3150 steel (UNS G31500)

M2330 / 100228

Production equipment and steel specification, etc
My company can provide more than 350 12 categories, more than 5,000 grades, from the top quality specification group of special steel metal materials.
Smelting equipment: furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode., 0.5 tons - 40 tons), vacuum induction furnace capacity 0.5-10 tons and tons ESR 0.35 tons - 8 tons.
Pressure: forging maxhine 1200 tons - 8,000 tons, 825 type, type, type of 250 650 mill.
polishing machine machining: Φ1- Φ 300, Φ sheller Φ 180; 60 - Car light lathe than 12 meters length, diameter, deep drilling than 12 meters length than 12 meters.
Type: ordinary and ingot ingots refining ingot 0.5 tons - 25 tons. Electricity slag remelting ingot 0.35-8 tons and tons of
Size: round bar rolling material Φ 1.0-280. Forging materials Φ 80-600, Φ diameter steel (Φ1 - Φ 235) x (thickness); 0.5-40. Sheet (0.5-12) x 1000 * 2000, Medium thickness plate rolling, forging, width: experiment.it than 610, Alien: fang, flat, ring, canister, steps axis, etc.
Heat: can provide annealing, normalizing, tempering, quenching, aging, piece.modified special requirements such as heat treatment process delivery of products.

Introduction to Our Products:

Specialized high quality steel

We have the advantages of equipment, technologies and price

Forging/hot rolling/ extrusion of steel

Specifications：

Round bar steel: 1mm to 2000mm

Square-shape steel: 10mm to 1000mm

Plate steel:0.08mm to 800mm

Width: 10mm to 1500mm

Lenth: We can supply any lenth based on the customer's requirement.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Tubings: OD: φ4-410 mm, with wall thickness ranging from 1-35 mm.

Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement

Excellent service for all kinds of industries,with advantages of technologies, equipment and price.

We serve you with our honesty, integrity, and professionality.

Mechanical properties

UNS G23300 Mechanical properties,Our production completely according to the UNS G23300 standards to meet the UNS G23300 mechanical performance, can also according to the customer request, to meet the requirements of customers of UNS G23300 mechanical properties.

Heat treatment

UNS G23300 Heat treatment,Our production completely according to the UNS G23300 standards to meet the UNS G23300 Heat treatment, can also according to the customer request, to meet the requirements of customers of UNS G23300 Heat treatment.

Machining

UNS G23300 Machining,Our production completely according to the UNS G23300 standards to meet the UNS G23300 Machining, can also according to the customer request, to meet the requirements of customers of UNS G23300 Machining.

Welding performance

UNS G23300 Welding performance,Our production completely according to the UNS G23300 standards to meet the UNS G23300 Welding performance, can also according to the customer request, to meet the requirements of customers of UNS G23300 Welding performance.

Prev:ASTM 51310
Next:UNS K92810