- EN45 Spring Steel round bar
- EN45 Spring Steel forging
- EN45 Spring Steel sheet
- EN45 Spring Steel flat bar
- EN45 Spring Steel pipe
EN45 Spring Steel
Production specification
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
EN45 Spring Steel
EN45 is a silicon mangenese spring steel, supplied in the as rolled contition. This steel is suitable for oil hardening and tempering. |
TYPICAL ANALYSIS |
|
|
||
C. |
Si. |
Mn. |
S. |
P. |
0.55% |
1.75% |
0.75% |
0.05% |
0.05% |
Forging:
Forge at 1150°C.
Annealing:
Slow furnace cool from 840°/900°C.
Hardening:
Pre heat slowly to 650/700°C and thoroughly soak. Continue heating to the final hardening temperature of 870/930°C and allow the component to be heated through. Quench in oil.
Tempering:
Temper immediately after quenching whilst tools are still hand warm. Re-heat to the tempering temperature, soak for one hour per 25 millimetre of total thickness, 2 hours minimum, then cool in air. For most applications tempering will be between 400°/550°C.
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search:EN45 Spring Steel round bar EN45 Spring Steel,forging EN45 Spring Steel,EN45 Spring Steel sheet,coil EN45 Spring Steel,EN45 Spring Steel flat bar,pipe EN45 Spring Steel,EN45 Spring Steel Lrregular
Prev:EN43 Spring Steel
Next:X120Mn12 Z120M12 1.3401 mn steel