Home > Alloy Steel > 1.2550 60WCrV7 Tool Steel

1.2550 60WCrV7 Tool Steel

We can produce 1.2550 60WCrV7 Tool Steel stainless steel round rods, 1.2550 60WCrV7 Tool Steel forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.2550 60WCrV7 Tool Steel chemical composition and 1.2550 60WCrV7 Tool Steel mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

1.2550 60WCrV7 Tool Steel

1.2550 60WCrV7 is a high duty shock resisting alloy steel/" target="_blank" class="keylink">tool steel. In the hardened condition 1.2550 60WCrV7 is a heat resisting tool steel that combines great hardness with good toughness and shock resisting properties.

TYPICAL ANALYSIS
C.	Si.	Mn.	Cr.	V.
0.50%	0.80%	1.50%	2.50%	0.20%

Forging:

Heat the 1.2550 steel/" target="_blank" class="keylink">tool steel component slowly and uniformly to 1000°C. Forge within a range of 1000/800°C, reheating if necessary. Cool slowly (preferably in a furnace) to avoid setting up stresses.

Annealing:

Heat the 1.2550 tool uniformly to 770°C, equalise, then furnace cool.

Stress Relieving:

If machining operations have been heavy or if the 1.2550 tool has an unbalanced section, remove stresses before hardening by heating up to 700°C, equalise, then cool slowly.

Hardening:

Pre heat the 1.2550 steel/" target="_blank" class="keylink">tool steel to 650°C and thoroughly soak. Continue heating to the final hardening temperature of 900/950°C. Allow sufficient time for the component to be heated through. Quench in oil.

Martempering:

Martempering is an alternative hardening procedure for 1.2550 which may be used when suitable salt bath equipment is available.

Tempering:

Heat uniformly and thoroughly at the selected tempering temperature and hold for at least one hour per inch of total thickness.

Tempering °C	150	200	250	350	400
HRc	62/61	61/60	60/59	58/57	55/54

Mechanical properties

1.2550 60WCrV7 Tool Steel Mechanical properties,Our production completely according to the 1.2550 60WCrV7 Tool Steel standards to meet the 1.2550 60WCrV7 Tool Steel mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.2550 60WCrV7 Tool Steel mechanical properties.

Heat treatment

1.2550 60WCrV7 Tool Steel Heat treatment,Our production completely according to the 1.2550 60WCrV7 Tool Steel standards to meet the 1.2550 60WCrV7 Tool Steel Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.2550 60WCrV7 Tool Steel Heat treatment.

Machining

1.2550 60WCrV7 Tool Steel Machining,Our production completely according to the 1.2550 60WCrV7 Tool Steel standards to meet the 1.2550 60WCrV7 Tool Steel Machining, can also according to the customer request, to meet the requirements of customers of 1.2550 60WCrV7 Tool Steel Machining.

Welding performance

1.2550 60WCrV7 Tool Steel Welding performance,Our production completely according to the 1.2550 60WCrV7 Tool Steel standards to meet the 1.2550 60WCrV7 Tool Steel Welding performance, can also according to the customer request, to meet the requirements of customers of 1.2550 60WCrV7 Tool Steel Welding performance.

Prev:1.2436 X210CrW12 Tool Steel
Next:1.2344 X40CrMoV5-1 Tool Steel