- 1.4116, DIN X50CrMoV15, AISI 440A round bar
- 1.4116, DIN X50CrMoV15, AISI 440A forging
- 1.4116, DIN X50CrMoV15, AISI 440A sheet
- 1.4116, DIN X50CrMoV15, AISI 440A flat bar
- 1.4116, DIN X50CrMoV15, AISI 440A pipe
1.4116, DIN X50CrMoV15, AISI 440A
Production specification
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.4116, DIN X50CrMoV15, AISI 440A
Designation by Standards
Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
PK5 | 812 | 1.4116* | X50CrMoV15* | X50CrMoV15* | 440A* |
Chemical Composition (in weight %)
C | Si | Mn | Cr | Mo | Ni | V | W | Others |
0.50 | max. 1.00 | max. 1.00 | 14.50 | 0.65 | - | 0.15 | - | - |
Description
This is a high carbon martensitic stainless steel with moderate corrosion resistance good strength and the ability to obtain and keep excellent hardness (Rc 56) and wear resistance.
Applications
Ball bearings and races, gage blocks, molds and dies, cutlery, valve components, knives and measuring instruments. All kinds of cutting tools - surgical instruments, pressing dies for synthetic resin.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 220
Density [g/cm3]: 7.7
Thermal conductivity [W/m.K]: 30.0
Electric resistivity [Ohm mm2/m]: 0.65
Specific heat capacity[J/g.K]: 0.46
Magnetisable: Yes
Coefficient of Linear Thermal Expansion 10-6 oC-1
20-100oC | 20-200oC | 20-300oC | 20-400oC | 20-500oC |
10.5 | 11.0 | 11.0 | 11.5 | 12.0 |
Soft Annealing
Heat to 730-780oC, cool slowly.
Hardening
Harden from a temperature of 980-1030oC followed by oil or air quenching.
Tempering
Tempering temperature: Please see the diagram bellow.
Tempering Diagram
Forging
Hot forming temperature: 1100-800oC.
Machinability
Best machined in the annealed condition. Tough, stringy chips can be best handled by the use of chip breakers. Carbide or ceramic tooling is recommended.
Corrosion Resistance
Resistant to a wide variety of media including fresh water, steam, petroleum products and alcohol.
Welding
This steel is not commonly welded due to its tendency to air harden. If it must be welded, preheat to 260oC and post weld treat at 732-760oC for 6 hours followed by a slow furnace cooling to avoid cracking.
Cold working
This alloy is considered only slightly cold workable by common practices.
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search:1.4116 DIN X50CrMoV15 AISI 440A round bar 1.4116, DIN X50CrMoV15, AISI 440A,forging 1.4116, DIN X50CrMoV15, AISI 440A,1.4116, DIN X50CrMoV15, AISI 440A sheet,coil 1.4116, DIN X50CrMoV15, AISI 440A,1.4116, DIN X50CrMoV15, AISI 440A flat bar,pipe 1.4116, DIN X50CrMoV15, AISI 440A,1.4116, DIN X50CrMoV15, AISI 440A Lrregular
Prev:1.4034, DIN X46Cr13, AISI 420
Next:1.41090, DIN X70CrMo15, AISI 440A