• 1.41090, DIN X70CrMo15, AISI 440A round bar
  • 1.41090, DIN X70CrMo15, AISI 440A forging
  • 1.41090, DIN X70CrMo15, AISI 440A sheet
  • 1.41090, DIN X70CrMo15, AISI 440A flat bar
  • 1.41090, DIN X70CrMo15, AISI 440A pipe
Home > Alloy Steel > 1.41090, DIN X70CrMo15, AISI 440A

1.41090, DIN X70CrMo15, AISI 440A

We can produce 1.41090, DIN X70CrMo15, AISI 440A stainless steel round rods, 1.41090, DIN X70CrMo15, AISI 440A forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.41090, DIN X70CrMo15, AISI 440A chemical composition and 1.41090, DIN X70CrMo15, AISI 440A mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

1.41090, DIN X70CrMo15, AISI 440A 

Designation by Standards

Brand Name LH No. Mat. No. DIN EN AISI
PK6 347 1.41090 X70CrMo15 - 440A

Chemical Composition (in weight %)

C Si Mn Cr Mo Ni V W Others
0.70 max. 0.70 max. 1.00 15.00 0.60 - - - -

Description
This is a high carbon martensitic stainless with moderate corrosion resistance good strength and the ability to obtain and keep excellent hardness and wear resistance. 

Applications
Ball bearings and races, gage blocks, molds and dies, cutlery, valve components, knives and measuring instruments. 

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210* 
Density [g/cm3]: 7.76
Thermal conductivity [W/m.K]: No data
Electric resistivity [Ohm mm2/m]: No data
Specific heat capacity[J/g.K]: No data

Soft Annealing
Heat to 840-870oC, cool slowly. 

Hardening
Harden from a temperature of 1000-1050oC followed by air or oil quenching.

Tempering
Tempering temperature: 100-150oC. Maximum obtainable hardness is HRC 56.

Forging
Hot forming temperature: 1100-900oC. 

Machinability
Best machined in the annealed condition. Tough, stringy chips can be best handled by the use of chip breakers. Carbide or ceramic tooling is recommended.
  

Mechanical properties

1.41090, DIN X70CrMo15, AISI 440A Mechanical properties,Our production completely according to the 1.41090, DIN X70CrMo15, AISI 440A standards to meet the 1.41090, DIN X70CrMo15, AISI 440A mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.41090, DIN X70CrMo15, AISI 440A mechanical properties.

Heat treatment

1.41090, DIN X70CrMo15, AISI 440A Heat treatment,Our production completely according to the 1.41090, DIN X70CrMo15, AISI 440A standards to meet the 1.41090, DIN X70CrMo15, AISI 440A Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.41090, DIN X70CrMo15, AISI 440A Heat treatment.

Machining

1.41090, DIN X70CrMo15, AISI 440A Machining,Our production completely according to the 1.41090, DIN X70CrMo15, AISI 440A standards to meet the 1.41090, DIN X70CrMo15, AISI 440A Machining, can also according to the customer request, to meet the requirements of customers of 1.41090, DIN X70CrMo15, AISI 440A Machining.

Welding performance

1.41090, DIN X70CrMo15, AISI 440A Welding performance,Our production completely according to the 1.41090, DIN X70CrMo15, AISI 440A standards to meet the 1.41090, DIN X70CrMo15, AISI 440A Welding performance, can also according to the customer request, to meet the requirements of customers of 1.41090, DIN X70CrMo15, AISI 440A Welding performance.

Related hot word search:1.41090 DIN X70CrMo15 AISI 440A round bar 1.41090, DIN X70CrMo15, AISI 440A,forging 1.41090, DIN X70CrMo15, AISI 440A,1.41090, DIN X70CrMo15, AISI 440A sheet,coil 1.41090, DIN X70CrMo15, AISI 440A,1.41090, DIN X70CrMo15, AISI 440A flat bar,pipe 1.41090, DIN X70CrMo15, AISI 440A,1.41090, DIN X70CrMo15, AISI 440A Lrregular

Prev:1.4116, DIN X50CrMoV15, AISI 440A
Next:1.4718, DIN X456CrSi9-3, AISI S 65007