- 1.4724, DIN X10CrAl13 round bar
- 1.4724, DIN X10CrAl13 forging
- 1.4724, DIN X10CrAl13 sheet
- 1.4724, DIN X10CrAl13 flat bar
- 1.4724, DIN X10CrAl13 pipe
1.4724, DIN X10CrAl13
We can produce 1.4724, DIN X10CrAl13 stainless steel round rods, 1.4724, DIN X10CrAl13 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.4724, DIN X10CrAl13 chemical composition and 1.4724, DIN X10CrAl13 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.4724, DIN X10CrAl13
Designation by Standards
| Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
| PK924 | 924 | 1.4724 | X10CrAl13 | X10CrSiAl13 | - |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| max. 0.12 | 1.05 | max. 1.00 | 13.00 | - | - | - | - | Al: 0.95 |
Description
Heat resistant stainless steel with excellent corrosion resistance.
Applications
Heat resistant up to temperature up to 850oC, and also can be used in sulphur containing gas. Bearing and conveying components, heat resistant components for thermal boilers, etc.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.7
Thermal conductivity [W/m.K]: 21.0
Electric resistivity [Ohm mm2/m]: 0.90
Specific heat capacity[J/g.K]: 0.45
Coefficient of Linear Thermal Expansion 10-6 oC-1
| 20-200oC | 20-400oC | 20-600oC | 20-800oC |
| 11.0 | 11.5 | 12.5 | 13.5 |
Soft Annealing
Heat to 800-850oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 192.
Hardening
Harden from a temperature of 940-980oC followed by oil quenching or warm bath approx. 400oC. Hardness after quenching is 64-66 HRC.
Tempering
Tempering temperature: See the data bellow.
Tempering Temperature (oC) vs. Hardness (HRC)
| 100oC | 200oC | 300oC | 400oC | 500oC | 600oC |
| 64 | 62 | 60 | 57 | 53 | 42 |
Forging
Hot forming temperature: 1100-800oC.
Machinability
Soft and ductile, PK924 can be easily machined using most standard practices. Experienced machinists comment that PK924 machines similarly to 4130 steel/" target="_blank" class="keylink">alloy steel.
Mechanical properties
1.4724, DIN X10CrAl13 Mechanical properties,Our production completely according to the 1.4724, DIN X10CrAl13 standards to meet the 1.4724, DIN X10CrAl13 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.4724, DIN X10CrAl13 mechanical properties.
Heat treatment
1.4724, DIN X10CrAl13 Heat treatment,Our production completely according to the 1.4724, DIN X10CrAl13 standards to meet the 1.4724, DIN X10CrAl13 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.4724, DIN X10CrAl13 Heat treatment.
Machining
1.4724, DIN X10CrAl13 Machining,Our production completely according to the 1.4724, DIN X10CrAl13 standards to meet the 1.4724, DIN X10CrAl13 Machining, can also according to the customer request, to meet the requirements of customers of 1.4724, DIN X10CrAl13 Machining.
Welding performance
1.4724, DIN X10CrAl13 Welding performance,Our production completely according to the 1.4724, DIN X10CrAl13 standards to meet the 1.4724, DIN X10CrAl13 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.4724, DIN X10CrAl13 Welding performance.
Related hot word search:1.4724 DIN X10CrAl13 round bar 1.4724, DIN X10CrAl13,forging 1.4724, DIN X10CrAl13,1.4724, DIN X10CrAl13 sheet,coil 1.4724, DIN X10CrAl13,1.4724, DIN X10CrAl13 flat bar,pipe 1.4724, DIN X10CrAl13,1.4724, DIN X10CrAl13 Lrregular
Prev:1.4747, DIN X80CrNiSi20
Next:1.4742, DIN X10CrAl18