- 1.4922, DIN X20CrMoV11-1 round bar
- 1.4922, DIN X20CrMoV11-1 forging
- 1.4922, DIN X20CrMoV11-1 sheet
- 1.4922, DIN X20CrMoV11-1 flat bar
- 1.4922, DIN X20CrMoV11-1 pipe
1.4922, DIN X20CrMoV11-1
Production specification
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.4922, DIN X20CrMoV11-1
Designation by Standards
Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
PT929 | 929 | 1.4922 | X20CrMoV11-1 | - | - |
Chemical Composition (in weight %)
C | Si | Mn | Cr | Mo | Ni | V | W | Others |
0.20 | max. 0.50 | max. 1.00 | 11.25 | 1.00 | 0.55 | 0.30 | - | - |
Description
Steel PT929 is creep-resistant material that is generally used for temperatures up to 650oC.
Applications
Component parts for steam turbines and other components, resistive to compressed hydrogen for chemical industry.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.76
Thermal conductivity [W/m.K]: 29.2
Electric resistivity [Ohm mm2/m]: 0.65
Specific heat capacity[J/g.K]: 0.46
Modulus of Elasticity [103 N/mm2]
20oC | 600oC |
210 | 180 |
Coefficient of Linear Thermal Expansion 10-6 oC-1
20-100oC | 20-200oC | 20-300oC | 20-400oC | 20-500oC | 20-600oC | 20-700oC | 20-800oC |
10.7 | 11.1 | 11.5 | 11.5 | 11.8 | 12.2 | 12.3 | 12.5 |
Soft Annealing
Heat to 730-780oC, cool slowly in furnace or air.
Stress Relieving
Stress relieving to remove machining stresses should be carried out by heating to 650-680oC, holding for one hour at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening
Harden from a temperature of 1020-1070oC followed by air or oil quenching. Structure is martensite.
Tempering
Tempering temperature: 720-780oC.
Mechanical Properties at Room Temperature
Size range mm | Heat treatment condition | 0.2 % proof stress (N/mm2) | Tensile strength (N/mm2) | Elongation (%) | Notch impact energy (ISO-V) (J) |
d<=100 | +Q+T | 500 | 700-850 | 16 (Long) 14 (Trans) | 29 (Long) 27 (Trans) |
d<=250 | +Q+T | 500 | 700-850 | 16 (Long) 14 (Trans) | 31 (Long) 27 (Trans) |
251-330 | +Q+T | 500 | 700-850 | 16 (Long) 14 (Trans) | 27 (Long) 27 (Trans) |
0.2 % Proof Stress (N/mm2) at Elevated Temperatures
Diameter (mm) | 100oC | 150oC | 200oC | 250oC | 300oC | 350oC | 400oC | 450oC | 500oC | 550oC | 600oC |
Up to 160 | 460 | 445 | 430 | 415 | 390 | 380 | 360 | 330 | 290 | 250 | 160 |
1 % Creep Limit (N/mm2) vs. Temperature (oC)
Hours | 480oC | 500oC | 520oC | 540oC | 560oC |
10 000 | 299 | 247 | 207 | 170 | 135 |
100 000 | 236 | 190 | 147 | 114 | 85 |
Creep Rapture Strength (N/mm2) vs. Temperature (oC)
Hours | 480oC | 500oC | 520oC | 540oC | 560oC |
10 000 | 345 | 294 | 253 | 213 | 173 |
100 000 | 284 | 235 | 186 | 147 | 112 |
200 000 | 262 | 215 | 167 | 128 | 96 |
Diagram Tempering Temperature - Mechanical Properties
Forging
Hot forming temperature: 1100-850oC, slow cooling.
Machinability
Metal-cutting machining is the same as for special engineering steel grades of corresponding strength.
Welding
Steel PT929 is weldable. Preheating and slow cooling after welding are recommended.
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search:1.4922 DIN X20CrMoV11-1 round bar 1.4922, DIN X20CrMoV11-1,forging 1.4922, DIN X20CrMoV11-1,1.4922, DIN X20CrMoV11-1 sheet,coil 1.4922, DIN X20CrMoV11-1,1.4922, DIN X20CrMoV11-1 flat bar,pipe 1.4922, DIN X20CrMoV11-1,1.4922, DIN X20CrMoV11-1 Lrregular
Prev:1.3949, DIN X5CrMn1813
Next:1.4903, DIN X10CrMoVNb9-1, AISI A213/P91