• Round bar standard Download
  • Square-shape steel standard Download
  • Plate steel standard Download
  • Billet standard Download
  • Flat bar standard Download
  • wire standard Download
  • tube standard Download
  • pipe standard Download
  • Forging standard Download
  • casting standard Download
  • sheet standard Download
  • round bar standard Download
  • coil standard Download
  • Bar stock standard Download
  • profiled bar standard Download
Home > Standard > SAE steel grades standard

SAE steel grades

SAE steel grades standard Download, We provide the main countries around the ISO standard download, including: AISI(US),UNS(US),SAE(US),ASTM(US),AMS(US),ASME(US),MIL(US),FED(US),DIN(DEU),JIS(JPN),AFNOR(FR),B.S.(UK),SS(SWE),UNI(ITA).

Production specification

Round bar standard Download
Square-shape steel standard Download
Plate steel standard Download
Billet standard Download
Flat bar standard Download
wire standard Download
tube standard Download
pipe standard Download
Forging standard Download
casting standard Download
sheet standard Download
round bar standard Download
coil standard Download
Bar stock standard Download
profiled bar standard Download

The Society of Automotive Engineers (SAE) designates SAE steel grades. These are four digit numbers which represent chemical composition standards for steel specifications. The American Iron and Steel Institute (AISI) originally started a very similar system. Over time they used the same numbers to refer to the same alloy, but the AISI system used a letter prefix to denote the steelmaking process. The prefix "C" denoted open-hearth furnace, electric arc furnace or basic oxygen furnace, while "E" denotes electric arc furnace steel.[1][2]

Prior to 1995 the AISI was also involved, and the standard was designated the AISI/SAE steel grades. The AISI stopped being involved because it never wrote any of the specifications.

 

steel">Carbon and steel/" target="_blank" class="keylink">alloy steel

steel" style="background-image: none; color: rgb(6,69,173); text-decoration: none; background-origin: initial; background-clip: initial" title="Carbon steel">Carbon steels and steel" style="background-image: none; color: rgb(6,69,173); text-decoration: none; background-origin: initial; background-clip: initial" title="Alloy steel">steel/" target="_blank" class="keylink">alloy steels are designated by a four digit number, where the first digit indicates the main alloying element(s), the second digit indicates the secondary alloying element(s), and the last two digits indicate the amount of carbon, in hundredths of a percent by weight. For example, a 1060 steel is a plain-carbon steel containing 0.60 wt% C.[4]

An "H" suffix can be added to any designation to denote hardenability is a major requirement. The chemical requirements are loosened but hardness values defined for various distances on a Jominy test.[2]

 

Major classifications of steel[1]
SAE designation Type
1xxx Carbon steels
2xxx Nickel steels
3xxx Nickel-chromium steels
4xxx Molybdenum steels
5xxx Chromium steels
6xxx Chromium-vanadium steels
7xxx Tungsten steels
8xxx Nickel-chromium-vanadium steels
9xxx Silicon-manganese steels
Carbon and steel/" target="_blank" class="keylink">alloy steel grades[5]
SAE designation Type
Carbon steels
10xx Plain carbon (Mn 1.00% max)
11xx Resulfurized
12xx Resulfurized and rephosphorized
15xx Plain carbon (Mn 1.00% to 1.65%)
Manganese steels
13xx Mn 1.75%
Nickel steels
23xx Ni 3.50%
25xx Ni 5.00%
Nickel-chromium steels
31xx Ni 1.25%, Cr 0.65% or 0.80%
32xx Ni 1.25%, Cr 1.07%
33xx Ni 3.50%, Cr 1.50% or 1.57%
34xx Ni 3.00%, Cr 0.77%
Molybdenum steels
40xx Mo 0.20% or 0.25% or 0.25% Mo & 0.042 S[3]
44xx Mo 0.40% or 0.52%
Chromium-molybdenum (Chromoly) steels
steel" style="background-image: none; color: rgb(6,69,173); text-decoration: none; background-origin: initial; background-clip: initial" title="41xx steel">41xx Cr 0.50% or 0.80% or 0.95%, Mo 0.12% or 0.20% or 0.25% or 0.30%
Nickel-chromium-molybdenum steels
43xx Ni 1.82%, Cr 0.50% to 0.80%, Mo 0.25%
43BVxx Ni 1.82%, Cr 0.50%, Mo 0.12% or 0.35%, V 0.03% min
47xx Ni 1.05%, Cr 0.45%, Mo 0.20% or 0.35%
81xx Ni 0.30%, Cr 0.40%, Mo 0.12%
81Bxx Ni 0.30%, Cr 0.45%, Mo 0.12%[3]
86xx Ni 0.55%, Cr 0.50%, Mo 0.20%
87xx Ni 0.55%, Cr 0.50%, Mo 0.25%
88xx Ni 0.55%, Cr 0.50%, Mo 0.35%
93xx Ni 3.25%, Cr 1.20%, Mo 0.12%
94xx Ni 0.45%, Cr 0.40%, Mo 0.12%
97xx Ni 0.55%, Cr 0.20%, Mo 0.20%
98xx Ni 1.00%, Cr 0.80%, Mo 0.25%
Nickel-molybdenum steels
46xx Ni 0.85% or 1.82%, Mo 0.20% or 0.25%
48xx Ni 3.50%, Mo 0.25%
Chromium steels
50xx Cr 0.27% or 0.40% or 0.50% or 0.65%
50xxx Cr 0.50%, C 1.00% min
50Bxx Cr 0.28% or 0.50%[3]
51xx Cr 0.80% or 0.87% or 0.92% or 1.00% or 1.05%
51xxx Cr 1.02%, C 1.00% min
51Bxx Cr 0.80%[3]
52xxx Cr 1.45%, C 1.00% min
Chromium-vanadium steels
61xx Cr 0.60% or 0.80% or 0.95%, V 0.10% or 0.15% min
Tungsten-chromium steels
72xx W 1.75%, Cr 0.75%
Silicon-manganese steels
92xx Si 1.40% or 2.00%, Mn 0.65% or 0.82% or 0.85%, Cr 0.00% or 0.65%
High-strength low-steel/" target="_blank" class="keylink">alloy steels
9xx Various SAE grades
xxBxx Boron steels
xxLxx Leaded steels

[steel_grades&action=edit&section=2" style="background-image: none; color: rgb(6,69,173); text-decoration: none; background-origin: initial; background-clip: initial" title="Edit section: Stainless steel">edit]steel">Stainless steel

  • Type 102—austenitic general purpose stainless steel working for furniture
  • 200 Series—austenitic chromium-nickel-manganese alloys
    • Type 201—austenitic that is hardenable through cold working
    • Type 202—austenitic general purpose stainless steel
  • 300 Series—austenitic chromium-nickel alloys
    • Type 301—highly ductile, for formed products. Also hardens rapidly during mechanical working. Good weldability. Better wear resistance and fatigue strength than 304.
    • Type 302—same corrosion resistance as 304, with slightly higher strength due to additional carbon.
    • Type 303—free machining version of 304 via addition of sulfur and phosphorus. Also referred to as "A1" in accordance with ISO 3506.[6]
    • Type 304—the most common grade; the classic 18/8 stainless steel. Outside of the US it is commonly known as "A2 stainless steel", in accordance with ISO 3506 (not to be confused with A2 steel/" target="_blank" class="keylink">tool steel).[6]
    • Type 304L—same as the 304 grade but lower carbon content to increase weldability. Is slightly weaker than 304.
    • Type 304LN—same as 304L, but also nitrogen is added to obtain a much higher yield and tensile strength than 304L.
    • Type 308—used as the filler metal when welding 304.
    • Type 309—better temperature resistance than 304, also sometimes used as filler metal when welding dissimilar steels, along with inconel.
    • Type 316—the second most common grade (after 304); for food and steel" style="background-image: none; color: rgb(6,69,173); text-decoration: none; background-origin: initial; background-clip: initial" title="Surgical stainless steel">surgical stainless steel uses; alloy addition of molybdenum prevents specific forms of corrosion. It is also known as marine grade stainless steel due to its increased resistance to chloride corrosion compared to type 304. 316 is often used for building nuclear reprocessing plants. 316L is an extra low carbon grade of 316, generally used in stainless steel watches and marine applications, as well exclusively in the fabrication of reactor pressure vessels for boiling water reactors, due to its high resistance to corrosion. Also referred to as "A4" in accordance with ISO 3506.[6] 316Ti includes titanium for heat resistance, therefore it is used in flexible chimney liners.
    • Type 321—similar to 304 but lower risk of weld decay due to addition of titanium. See also 347 with addition of niobium for desensitization during welding.
  • 400 Series—ferritic and martensitic chromium alloys
    • Type 405—ferritic for welding applications
    • Type 408—heat-resistant; poor corrosion resistance; 11% chromium, 8% nickel.
    • Type 409—cheapest type; used for automobile exhausts; ferritic (iron/chromium only).
    • Type 410—martensitic (high-strength iron/chromium). Wear-resistant, but less corrosion-resistant.
    • Type 416—easy to machine due to additional sulfur
    • Type 420—Cutlery Grade martensitic; similar to the Brearley's original rustless steel. Excellent polishability.
    • Type 430—decorative, e.g., for automotive trim; ferritic. Good formability, but with reduced temperature and corrosion resistance.
    • Type 439—ferritic grade, a higher grade version of 409 used for catalytic converter exhaust sections. Increased chromium for improved high temperature corrosion/oxidation resistance.
    • Type 440—a higher grade of cutlery steel, with more carbon, allowing for much better edge retention when properly heat-treated. It can be hardened to approximately Rockwell 58 hardness, making it one of the hardest stainless steels. Due to its toughness and relatively low cost, most display-only and replica swords or knives are made of 440 stainless. Available in four grades: 440A, 440B, 440C, and the uncommon 440F (free machinable). 440A, having the least amount of carbon in it, is the most stain-resistant; 440C, having the most, is the strongest and is usually considered more desirable in knifemaking than 440A[citation needed], except for diving or other salt-water applications.
    • Type 446—For elevated temperature service
  • 500 Series—heat-resisting chromium alloys
  • 600 Series—martensitic precipitation hardening alloys
    • 601 through 604: Martensitic low-steel/" target="_blank" class="keylink">alloy steels.
    • 610 through 613: Martensitic secondary hardening steels.
    • 614 through 619: Martensitic chromium steels.
    • 630 through 635: Semiaustenitic and martensitic precipitation-hardening stainless steels.
      • Type 630 is most common PH stainless, better known as 17-4; 17% chromium, 4% nickel.
    • 650 through 653: Austenitic steels strengthened by hot/cold work.
    • 660 through 665: Austenitic superalloys; all grades except alloy 661 are strengthened by second-phase precipitation.
  • Type 2205—the most widely used duplex (ferritic/austenitic) stainless steel grade. It has both excellent corrosion resistance and high strength.
  • Type 2304—lean duplex stainless steel. Similar to 2205 for strength but with lower pitting corrosion resistance due to low Molybdenum.

 

Stainless steel designations[7]
SAE designation UNS designation  % Cr  % Ni  % C  % Mn  % Si  % P  % S  % N Other
Austenitic
201 S20100 16–18 3.5–5.5 0.15 5.5–7.5 0.75 0.06 0.03 0.25 -
202 S20200 17–19 4–6 0.15 7.5–10.0 0.75 0.06 0.03 0.25 -
205 S20500 16.5–18 1–1.75 0.12–0.25 14–15.5 0.75 0.06 0.03 0.32–0.40 -
254[8] S31254 20 18 0.02 max - - - - 0.20 6 Mo; 0.75 Cu; "Super austenitic"; All values nominal
301 S30100 16–18 6–8 0.15 2 0.75 0.045 0.03 - -
302 S30200 17–19 8–10 0.15 2 0.75 0.045 0.03 0.1 -
302B S30215 17–19 8–10 0.15 2 2.0–3.0 0.045 0.03 - -
303 S30300 17–19 8–10 0.15 2 1 0.2 0.15 min - Mo 0.60 (optional)
303Se S30323 17–19 8–10 0.15 2 1 0.2 0.06 - 0.15 Se min
304 S30400 18–20 8–10.50 0.08 2 0.75 0.045 0.03 0.1 -
304L S30403 18–20 8–12 0.03 2 0.75 0.045 0.03 0.1 -
304Cu S30430 17–19 8–10 0.08 2 0.75 0.045 0.03 - 3–4 Cu
304N S30451 18–20 8–10.50 0.08 2 0.75 0.045 0.03 0.10–0.16 -
305 S30500 17–19 10.50–13 0.12 2 0.75 0.045 0.03 - -
308 S30800 19–21 10–12 0.08 2 1 0.045 0.03 - -
309 S30900 22–24 12–15 0.2 2 1 0.045 0.03 - -
309S S30908 22–24 12–15 0.08 2 1 0.045 0.03 - -
310 S31000 24–26 19–22 0.25 2 1.5 0.045 0.03 - -
310S S31008 24–26 19–22 0.08 2 1.5 0.045 0.03 - -
314 S31400 23–26 19–22 0.25 2 1.5–3.0 0.045 0.03 - -
316 S31600 16–18 10–14 0.08 2 0.75 0.045 0.03 0.10 2.0–3.0 Mo
316L S31603 16–18 10–14 0.03 2 0.75 0.045 0.03 0.10 2.0–3.0 Mo
316F S31620 16–18 10–14 0.08 2 1 0.2 0.10 min - 1.75–2.50 Mo
316N S31651 16–18 10–14 0.08 2 0.75 0.045 0.03 0.10–0.16 2.0–3.0 Mo
317 S31700 18–20 11–15 0.08 2 0.75 0.045 0.03 0.10 max 3.0–4.0 Mo
317L S31703 18–20 11–15 0.03 2 0.75 0.045 0.03 0.10 max 3.0–4.0 Mo
321 S32100 17–19 9–12 0.08 2 0.75 0.045 0.03 0.10 max Ti 5(C+N) min, 0.70 max
329 S32900 23–28 2.5–5 0.08 2 0.75 0.04 0.03 - 1–2 Mo
330 N08330 17–20 34–37 0.08 2 0.75–1.50 0.04 0.03 - -
347 S34700 17–19 9–13 0.08 2 0.75 0.045 0.030 - Nb + Ta, 10 x C min, 1 max
348 S34800 17–19 9–13 0.08 2 0.75 0.045 0.030 - Nb + Ta, 10 x C min, 1 max, but 0.10 Ta max; 0.20 Ca
384 S38400 15–17 17–19 0.08 2 1 0.045 0.03 - -
SAE designation UNS designation  % Cr  % Ni  % C  % Mn  % Si  % P  % S  % N Other
Ferritic
405 S40500 11.5–14.5 - 0.08 1 1 0.04 0.03 - 0.1–0.3 Al, 0.60 max
409 S40900 10.5–11.75 0.05 0.08 1 1 0.045 0.03 - Ti 6 x C, but 0.75 max
429 S42900 14–16 0.75 0.12 1 1 0.04 0.03 - -
430 S43000 16–18 0.75 0.12 1 1 0.04 0.03 - -
430F S43020 16–18 - 0.12 1.25 1 0.06 0.15 min - 0.60 Mo (optional)
430FSe S43023 16–18 - 0.12 1.25 1 0.06 0.06 - 0.15 Se min
434 S43400 16–18 - 0.12 1 1 0.04 0.03 - 0.75–1.25 Mo
436 S43600 16–18 - 0.12 1 1 0.04 0.03 - 0.75–1.25 Mo; Nb+Ta 5 x C min, 0.70 max
442 S44200 18–23 - 0.2 1 1 0.04 0.03 - -
446 S44600 23–27 0.25 0.2 1.5 1 0.04 0.03 - -
SAE designation UNS designation  % Cr  % Ni  % C  % Mn  % Si  % P  % S  % N Other
Martensitic
403 S40300 11.5–13.0 0.60 0.15 1 0.5 0.04 0.03 - -
410 S41000 11.5–13.5 0.75 0.15 1 1 0.04 0.03 - -
414 S41400 11.5–13.5 1.25–2.50 0.15 1 1 0.04 0.03 - -
416 S41600 12–14 - 0.15 1.25 1 0.06 0.15 min - 0.060 Mo (optional)
416Se S41623 12–14 - 0.15 1.25 1 0.06 0.06 - 0.15 Se min
420 S42000 12–14 - 0.15 min 1 1 0.04 0.03 - -
420F S42020 12–14 - 0.15 min 1.25 1 0.06 0.15 min - 0.60 Mo max (optional)
422 S42200 11.0–12.5 0.50–1.0 0.20–0.25 0.5–1.0 0.5 0.025 0.025 - 0.90–1.25 Mo; 0.20–0.30 V; 0.90–1.25 W
431 S41623 15–17 1.25–2.50 0.2 1 1 0.04 0.03 - -
440A S44002 16–18 - 0.60–0.75 1 1 0.04 0.03 - 0.75 Mo
440B S44003 16–18 - 0.75–0.95 1 1 0.04 0.03 - 0.75 Mo
440C S44004 16–18 - 0.95–1.20 1 1 0.04 0.03 - 0.75 Mo
SAE designation UNS designation  % Cr  % Ni  % C  % Mn  % Si  % P  % S  % N Other
Heat resisting
501 S50100 4–6 - 0.10 min 1 1 0.04 0.03 - 0.40–0.65 Mo
502 S50200 4–6 - 0.1 1 1 0.04 0.03 - 0.40–0.65 Mo
Duplex
2205[8] S31803
S32205
22 5 0.03 max - - - - 0.15 3 Mo; All values nominal
2304 S32304 23 4 0.03 max - 1.00 max 0.04 max 0.04 max 0.15 0.10-0.60 Mo
Super duplex
2507[8] S32750 25 7 0.03 max - - - - 0.28 4 Mo; All values nominal
Martensitic precipitation hardening
630 S17400 15-17 3-5 0.07 1 1 0.04 0.03 - Cu 3-5, Ta 0.15-0.45 [9]

[steel_grades&action=edit&section=3" style="background-image: none; color: rgb(6,69,173); text-decoration: none; background-origin: initial; background-clip: initial" title="Edit section: High-strength low-alloy steel">edit]High-strength low-steel/" target="_blank" class="keylink">alloy steel

Related hot word search: SAE steel grades SAE steel grades round bar, SAE steel grades forging, SAE steel grades sheet, SAE steel grades coil, SAE steel grades flat bar, SAE steel grades pipe, SAE steel grades Lrregular

Prev:SAE steel grades
Next:List of ASTM International standards