- AMS 4924 round bar
- AMS 4924 forging
- AMS 4924 sheet
- AMS 4924 flat bar
- AMS 4924 pipe
AMS 4924
We can produce AMS 4924 stainless steel round rods, AMS 4924 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control AMS 4924 chemical composition and AMS 4924 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Categories: | Metal; Ferrous Metal; Carbon Steel; AISI 1000 Series Steel; Low Carbon steel |
Material Notes: | Easily cold formed by heading, extruding, upsetting, bending, and other deforming processes. Uses for wires include electroplated products, such as racks, storage bins, shopping carts, fan guards, and jewelry, and unplated such as wires, staples, hardware, and barbed wire. |
Key Words: | UNS G10100, AMS 5040, AMS 5042, AMS 5044, AMS 5047, AMS 5053, ASTM A29, ASTM A108, ASTM A510, ASTM A519, ASTM A545, ASTM A549, ASTM A575, ASTM A576, MIL SPEC MIL-S-11310 (CS1010), JIS S 9 CK, SAE J403, SAE J412, SAE J414, DIN 1.1121, AFNOR XC 10 (Fr), JIS S10 C, JIS S 12 C |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 7.87 g/cc | 0.284 lb/in³ | Typical for steel |
Mechanical Properties | Metric | English | Comments |
Hardness, Brinell | 95 | 95 | |
Hardness, Knoop | 113 | 113 | Converted from Brinell hardness. |
Hardness, Rockwell B | 55 | 55 | Converted from Brinell hardness. |
Hardness, Vickers | 98 | 98 | Converted from Brinell hardness. |
Tensile Strength, Ultimate | 325 MPa | 47100 psi | |
Tensile Strength, Yield | 180 MPa | 26100 psi | |
Elongation at Break | 28.0 % | 28.0 % | in 50 mm |
Reduction of Area | 50.0 % | 50.0 % | |
Modulus of Elasticity | 200 GPa | 29000 ksi | Typical for steel |
Bulk Modulus | 140 GPa | 20300 ksi | Typical for steel |
Poissons Ratio | 0.290 | 0.290 | Typical For Steel |
Machinability | 55 % | 55 % | Based on AISI 1212 steel. as 100% machinability. The machinability of Group I bar, rod, and wire products can be improved by cold drawing. |
Shear Modulus | 80.0 GPa | 11600 ksi | Typical for steel |
Electrical Properties | Metric | English | Comments |
Electrical Resistivity | 0.0000143 ohm-cm | 0.0000143 ohm-cm | condition unknown |
Thermal Properties | Metric | English | Comments |
CTE, linear |
12.2 µm/m-°C @Temperature 0.000 - 100 °C |
6.78 µin/in-°F @Temperature 32.0 - 212 °F |
|
13.0 µm/m-°C @Temperature 0.000 - 200 °C |
7.22 µin/in-°F @Temperature 32.0 - 392 °F |
||
13.5 µm/m-°C @Temperature 0.000 - 300 °C |
7.50 µin/in-°F @Temperature 32.0 - 572 °F |
||
13.8 µm/m-°C @Temperature 0.000 - 400 °C |
7.67 µin/in-°F @Temperature 32.0 - 752 °F |
||
14.2 µm/m-°C @Temperature 0.000 - 500 °C |
7.89 µin/in-°F @Temperature 32.0 - 932 °F |
||
14.6 µm/m-°C @Temperature 0.000 - 600 °C |
8.11 µin/in-°F @Temperature 32.0 - 1110 °F |
||
14.9 µm/m-°C @Temperature 0.000 - 700 °C |
8.28 µin/in-°F @Temperature 32.0 - 1290 °F |
||
Specific Heat Capacity | 0.448 J/g-°C | 0.107 BTU/lb-°F | condition unknown; 50-100°C (122-212°F) |
0.498 J/g-°C @Temperature 150 - 200 °C |
0.119 BTU/lb-°F @Temperature 302 - 392 °F |
||
0.519 J/g-°C @Temperature 200 - 250 °C |
0.124 BTU/lb-°F @Temperature 392 - 482 °F |
||
0.536 J/g-°C @Temperature 250 - 300 °C |
0.128 BTU/lb-°F @Temperature 482 - 572 °F |
||
0.565 J/g-°C @Temperature 300 - 350 °C |
0.135 BTU/lb-°F @Temperature 572 - 662 °F |
||
0.590 J/g-°C @Temperature 350 - 400 °C |
0.141 BTU/lb-°F @Temperature 662 - 752 °F |
||
0.649 J/g-°C @Temperature 400 - 450 °C |
0.155 BTU/lb-°F @Temperature 752 - 842 °F |
||
0.729 J/g-°C @Temperature 550 - 600 °C |
0.174 BTU/lb-°F @Temperature 1020 - 1110 °F |
||
0.825 J/g-°C @Temperature 650 - 700 °C |
0.197 BTU/lb-°F @Temperature 1200 - 1290 °F |
||
Thermal Conductivity | 51.9 W/m-K | 360 BTU-in/hr-ft²-°F | Typical steel |
Component Elements Properties | Metric | English | Comments |
Carbon, C | 0.080 - 0.13 % | 0.080 - 0.13 % | |
Iron, Fe | 99.18 - 99.62 % | 99.18 - 99.62 % | As remainder |
Manganese, Mn | 0.30 - 0.60 % | 0.30 - 0.60 % | |
Phosphorous, P | <= 0.040 % | <= 0.040 % | |
Sulfur, S | <= 0.050 % | <= 0.050 % |
Users viewing this material also viewed the following:
AISI 1010 Steel, cold drawn
AISI 1010 Steel, cold drawn bar, 19-32 mm (0.75-1.25 in) round or thickness
AISI 1010 Steel, CQ sheet,1.6-5.8 mm round or thickness
AISI 1008 Steel, hot rolled bar, 19-32 mm (0.75-1.25 in) round
AISI 1008 Steel, cold drawn bar, 19-32 mm (0.75-1.25 in) round
M1010B / 6783
Mechanical properties
AMS 4924 Mechanical properties,Our production completely according to the AMS 4924 standards to meet the AMS 4924 mechanical performance, can also according to the customer request, to meet the requirements of customers of AMS 4924 mechanical properties.
Heat treatment
AMS 4924 Heat treatment,Our production completely according to the AMS 4924 standards to meet the AMS 4924 Heat treatment, can also according to the customer request, to meet the requirements of customers of AMS 4924 Heat treatment.
Machining
AMS 4924 Machining,Our production completely according to the AMS 4924 standards to meet the AMS 4924 Machining, can also according to the customer request, to meet the requirements of customers of AMS 4924 Machining.
Welding performance
AMS 4924 Welding performance,Our production completely according to the AMS 4924 standards to meet the AMS 4924 Welding performance, can also according to the customer request, to meet the requirements of customers of AMS 4924 Welding performance.
Related hot word search: round bar AMS 4924,forging AMS 4924,AMS 4924 sheet,coil AMS 4924,AMS 4924 flat bar,pipe AMS 4924,AMS 4924 Lrregular
Prev:ASTM A36
Next:UNS G10100