Home > Carbon Steel > UNS G10100

UNS G10100

We can produce UNS G10100 stainless steel round rods, UNS G10100 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control UNS G10100 chemical composition and UNS G10100 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

Physical Properties	Metric	English	Comments
Density	7.87 g/cc	0.284 lb/in³	Typical for steel

Mechanical Properties	Metric	English	Comments
Hardness, Brinell	95	95
Hardness, Knoop	113	113	Converted from Brinell hardness.
Hardness, Rockwell B	55	55	Converted from Brinell hardness.
Hardness, Vickers	98	98	Converted from Brinell hardness.
Tensile Strength, Ultimate	325 MPa	47100 psi
Tensile Strength, Yield	180 MPa	26100 psi
Elongation at Break	28.0 %	28.0 %	in 50 mm
Reduction of Area	50.0 %	50.0 %
Modulus of Elasticity	200 GPa	29000 ksi	Typical for steel
Bulk Modulus	140 GPa	20300 ksi	Typical for steel
Poissons Ratio	0.290	0.290	Typical For Steel
Machinability	55 %	55 %	Based on AISI 1212 steel. as 100% machinability. The machinability of Group I bar, rod, and wire products can be improved by cold drawing.
Shear Modulus	80.0 GPa	11600 ksi	Typical for steel

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.0000143 ohm-cm	0.0000143 ohm-cm	condition unknown

Thermal Properties	Metric	English	Comments
CTE, linear	12.2 µm/m-°C @Temperature 0.000 - 100 °C	6.78 µin/in-°F @Temperature 32.0 - 212 °F
	13.0 µm/m-°C @Temperature 0.000 - 200 °C	7.22 µin/in-°F @Temperature 32.0 - 392 °F
	13.5 µm/m-°C @Temperature 0.000 - 300 °C	7.50 µin/in-°F @Temperature 32.0 - 572 °F
	13.8 µm/m-°C @Temperature 0.000 - 400 °C	7.67 µin/in-°F @Temperature 32.0 - 752 °F
	14.2 µm/m-°C @Temperature 0.000 - 500 °C	7.89 µin/in-°F @Temperature 32.0 - 932 °F
	14.6 µm/m-°C @Temperature 0.000 - 600 °C	8.11 µin/in-°F @Temperature 32.0 - 1110 °F
	14.9 µm/m-°C @Temperature 0.000 - 700 °C	8.28 µin/in-°F @Temperature 32.0 - 1290 °F
Specific Heat Capacity	0.448 J/g-°C	0.107 BTU/lb-°F	condition unknown; 50-100°C (122-212°F)
	0.498 J/g-°C @Temperature 150 - 200 °C	0.119 BTU/lb-°F @Temperature 302 - 392 °F
	0.519 J/g-°C @Temperature 200 - 250 °C	0.124 BTU/lb-°F @Temperature 392 - 482 °F
	0.536 J/g-°C @Temperature 250 - 300 °C	0.128 BTU/lb-°F @Temperature 482 - 572 °F
	0.565 J/g-°C @Temperature 300 - 350 °C	0.135 BTU/lb-°F @Temperature 572 - 662 °F
	0.590 J/g-°C @Temperature 350 - 400 °C	0.141 BTU/lb-°F @Temperature 662 - 752 °F
	0.649 J/g-°C @Temperature 400 - 450 °C	0.155 BTU/lb-°F @Temperature 752 - 842 °F
	0.729 J/g-°C @Temperature 550 - 600 °C	0.174 BTU/lb-°F @Temperature 1020 - 1110 °F
	0.825 J/g-°C @Temperature 650 - 700 °C	0.197 BTU/lb-°F @Temperature 1200 - 1290 °F
Thermal Conductivity	51.9 W/m-K	360 BTU-in/hr-ft²-°F	Typical steel

Component Elements Properties	Metric	English	Comments
Carbon, C	0.080 - 0.13 %	0.080 - 0.13 %
Iron, Fe	99.18 - 99.62 %	99.18 - 99.62 %	As remainder
Manganese, Mn	0.30 - 0.60 %	0.30 - 0.60 %
Phosphorous, P	<= 0.040 %	<= 0.040 %
Sulfur, S	<= 0.050 %	<= 0.050 %

Users viewing this material also viewed the following:
AISI 1010 Steel, cold drawn
AISI 1010 Steel, cold drawn bar, 19-32 mm (0.75-1.25 in) round or thickness
AISI 1010 Steel, CQ sheet,1.6-5.8 mm round or thickness
AISI 1008 Steel, hot rolled bar, 19-32 mm (0.75-1.25 in) round
AISI 1008 Steel, cold drawn bar, 19-32 mm (0.75-1.25 in) round

M1010B / 6783

Mechanical properties

UNS G10100 Mechanical properties,Our production completely according to the UNS G10100 standards to meet the UNS G10100 mechanical performance, can also according to the customer request, to meet the requirements of customers of UNS G10100 mechanical properties.

Heat treatment

UNS G10100 Heat treatment,Our production completely according to the UNS G10100 standards to meet the UNS G10100 Heat treatment, can also according to the customer request, to meet the requirements of customers of UNS G10100 Heat treatment.

Machining

UNS G10100 Machining,Our production completely according to the UNS G10100 standards to meet the UNS G10100 Machining, can also according to the customer request, to meet the requirements of customers of UNS G10100 Machining.

Welding performance

UNS G10100 Welding performance,Our production completely according to the UNS G10100 standards to meet the UNS G10100 Welding performance, can also according to the customer request, to meet the requirements of customers of UNS G10100 Welding performance.

Prev:AMS 4924
Next:StE 380