- 1.0540, DIN C50, AISI 1050 round bar
- 1.0540, DIN C50, AISI 1050 forging
- 1.0540, DIN C50, AISI 1050 sheet
- 1.0540, DIN C50, AISI 1050 flat bar
- 1.0540, DIN C50, AISI 1050 pipe
1.0540, DIN C50, AISI 1050
We can produce 1.0540, DIN C50, AISI 1050 stainless steel round rods, 1.0540, DIN C50, AISI 1050 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.0540, DIN C50, AISI 1050 chemical composition and 1.0540, DIN C50, AISI 1050 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.0540, DIN C50, AISI 1050
Designation by Standards
| Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
| C50 | 522 | 1.0540 | C50 | - | 1050 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.51 | 0.20 | 0.75 | 0.20 | 0.05 | 0.20 | - | - | - |
Description
C50 is a medium carbon steel is used when greater strength and hardness is desired than in the "as rolled" condition.
Applications
Quenched and subsequently tempered steel for screws, forgings, wheel tyres, shafts, sickles, axes, knives, wood working drills, hammers, etc.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 205
Density [g/cm3]: 7.85
Specific heat capacity[J/g.K]: 0.48
Coefficient of Linear Thermal Expansion 10-6 oC-1
| 20-100oC | 20-250oC | 20-500oC |
| 11.5 | 13.0 | 14.0 |
Soft Annealing
Heat to 680-710oC, cool slowly in furnace.
Normalizing
Normalizing temperature: 840-880oC/air.
Hardening
Harden from a temperature of 820-860oC followed by water or oil quenching.
Tempering
Tempering temperature: 550-660oC/air.
Forging
Hot forming temperature: 1050-850oC.
Machinability
No data.
Mechanical properties
1.0540, DIN C50, AISI 1050 Mechanical properties,Our production completely according to the 1.0540, DIN C50, AISI 1050 standards to meet the 1.0540, DIN C50, AISI 1050 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.0540, DIN C50, AISI 1050 mechanical properties.
Heat treatment
1.0540, DIN C50, AISI 1050 Heat treatment,Our production completely according to the 1.0540, DIN C50, AISI 1050 standards to meet the 1.0540, DIN C50, AISI 1050 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.0540, DIN C50, AISI 1050 Heat treatment.
Machining
1.0540, DIN C50, AISI 1050 Machining,Our production completely according to the 1.0540, DIN C50, AISI 1050 standards to meet the 1.0540, DIN C50, AISI 1050 Machining, can also according to the customer request, to meet the requirements of customers of 1.0540, DIN C50, AISI 1050 Machining.
Welding performance
1.0540, DIN C50, AISI 1050 Welding performance,Our production completely according to the 1.0540, DIN C50, AISI 1050 standards to meet the 1.0540, DIN C50, AISI 1050 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.0540, DIN C50, AISI 1050 Welding performance.
Related hot word search:1.0540 DIN C50 AISI 1050 round bar 1.0540, DIN C50, AISI 1050,forging 1.0540, DIN C50, AISI 1050,1.0540, DIN C50, AISI 1050 sheet,coil 1.0540, DIN C50, AISI 1050,1.0540, DIN C50, AISI 1050 flat bar,pipe 1.0540, DIN C50, AISI 1050,1.0540, DIN C50, AISI 1050 Lrregular
Prev:1.0503, DIN C45, AISI 1045
Next:1.0535, DIN C45, AISI 1055