- 1.0535, DIN C45, AISI 1055 round bar
- 1.0535, DIN C45, AISI 1055 forging
- 1.0535, DIN C45, AISI 1055 sheet
- 1.0535, DIN C45, AISI 1055 flat bar
- 1.0535, DIN C45, AISI 1055 pipe
1.0535, DIN C45, AISI 1055
We can produce 1.0535, DIN C45, AISI 1055 stainless steel round rods, 1.0535, DIN C45, AISI 1055 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.0535, DIN C45, AISI 1055 chemical composition and 1.0535, DIN C45, AISI 1055 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
1.0535, DIN C45, AISI 1055
Designation by Standards
| Brand Name | LH No. | Mat. No. | DIN | EN | AISI |
| C55 | 517 | 1.0535 | C45 | - | 1055 |
Chemical Composition (in weight %)
| C | Si | Mn | Cr | Mo | Ni | V | W | Others |
| 0.56 | max. 0.40 | 0.75 | max. 0.40 | max. 0.10 | max. 0.40 | - | - | (Cr+Mo+Ni)= max. 0.63 |
Description
C55 is a medium carbon steel is used when greater strength and hardness is desired than in the "as rolled" condition. Extreme size accuracy, straightness and concentricity combine to minimize wear in high speed applications. Turned, ground and polished.
Applications
Quenched and subsequently tempered steel for less exacting springs, shafts, bushings, crankshafts, etc.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 205
Density [g/cm3]: 7.85
Soft Annealing
Heat to 650-700oC, cool slowly. This will produce a maximum Brinell hardness of 229.
Normalizing
Temperature: 825-865oC.
Hardening
Harden from a temperature of 805-845oC followed by water or oil quenching.
Tempering
Tempering temperature: 550-660oC.
Mechanical Properties in Quenched+Tempered Condition
| Diameter (mm) | 0.2 % proof stress (N/mm2) | Tensile strength (N/mm2) | Elongation A5 (%) | Reduction Z (%) |
| up to 16 | 540 | 780-930 | 12 | 20 |
| 17-40 | 460 | 740-890 | 14 | 30 |
| 41-100 | 420 | 700-850 | 15 | 35 |
Forging
Hot forming temperature: 1050-850oC.
Machinability
No data.
Mechanical properties
1.0535, DIN C45, AISI 1055 Mechanical properties,Our production completely according to the 1.0535, DIN C45, AISI 1055 standards to meet the 1.0535, DIN C45, AISI 1055 mechanical performance, can also according to the customer request, to meet the requirements of customers of 1.0535, DIN C45, AISI 1055 mechanical properties.
Heat treatment
1.0535, DIN C45, AISI 1055 Heat treatment,Our production completely according to the 1.0535, DIN C45, AISI 1055 standards to meet the 1.0535, DIN C45, AISI 1055 Heat treatment, can also according to the customer request, to meet the requirements of customers of 1.0535, DIN C45, AISI 1055 Heat treatment.
Machining
1.0535, DIN C45, AISI 1055 Machining,Our production completely according to the 1.0535, DIN C45, AISI 1055 standards to meet the 1.0535, DIN C45, AISI 1055 Machining, can also according to the customer request, to meet the requirements of customers of 1.0535, DIN C45, AISI 1055 Machining.
Welding performance
1.0535, DIN C45, AISI 1055 Welding performance,Our production completely according to the 1.0535, DIN C45, AISI 1055 standards to meet the 1.0535, DIN C45, AISI 1055 Welding performance, can also according to the customer request, to meet the requirements of customers of 1.0535, DIN C45, AISI 1055 Welding performance.
Related hot word search:1.0535 DIN C45 AISI 1055 round bar 1.0535, DIN C45, AISI 1055,forging 1.0535, DIN C45, AISI 1055,1.0535, DIN C45, AISI 1055 sheet,coil 1.0535, DIN C45, AISI 1055,1.0535, DIN C45, AISI 1055 flat bar,pipe 1.0535, DIN C45, AISI 1055,1.0535, DIN C45, AISI 1055 Lrregular
Prev:1.0540, DIN C50, AISI 1050
Next:1.0601, DIN C60, AISI 1060