- 410S21 round bar
- 410S21 forging
- 410S21 sheet
- 410S21 flat bar
- 410S21 pipe
410S21
Production specification
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
410 martensitic stainless steel is a general purpose grade often supplied in the hardened but still machinable condition, for applications where high strength and moderate heat and corrosion resistance are required.. |
Step Shaft 410 Tube 410 Pie-shaped 410 Ring 410 Module 410 Large valves of the main 410 Other Profiled Forgings 410
Introduction to Our Products:
Specialized high quality steel
We have the advantages of equipment, technologies and price
Forging/hot rolling/ extrusion of steel
Specifications
Round bar steel: 1mm to 2000mm
Square-shape steel: 50mm to 600mm
Plate steel:0.1mm to 800mm
Width: 10mm to 1500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot Forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement
Excellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Typical Analysis |
|
|
|
|
|
|
|
C. |
Mn. |
P. |
S. |
Si. |
Cr. |
Ni. |
Mo. |
0.09- |
1.00% |
0.04% |
0.03% |
1.00% |
11.50- |
1.00% |
0.30- |
0.15% |
max. |
max. |
max.. |
max. |
13.50% |
max |
max. |
Physical Properties | ||||
Temperature | ||||
|
20ºC |
100ºC |
200ºC |
400ºC |
Modulus of elasticity |
22500 |
22000 |
21000 |
19500 |
kg/mm | ||||
Specific heat |
0.11 |
0.12 |
0.13 |
0.14 |
kcal/ºC | ||||
Specific electrical resistance |
0.6 |
0.7 |
0.8 |
0.9 |
(resistivity) | ||||
Mean value for: | ||||
20-100ºC |
20-200ºC |
20-400ºC |
20-800ºC |
|
Coefficient of Thermal Expansion |
11 |
11 |
12 |
13 |
x10-6 per ºC | ||||
Density g/cm3 at 20ºC |
7.7 |
|||
Scaling temperature ºC |
825ºC |
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search: round bar 410S21,forging 410S21,410S21 sheet,coil 410S21,410S21 flat bar,pipe 410S21,410S21 Lrregular