- 15-5 round bar
- 15-5 forging
- 15-5 sheet
- 15-5 flat bar
- 15-5 pipe
15-5
Production specification
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Chemical composition % of the ladle analysis of grade 15-5 and Standards
15-5 PH Stainless Steel Condition A (annealed) | ||
Minimum Properties | Ultimate Tensile Strength, psi | 161,000 |
Yield Strength, psi | 140,000 | |
Elongation | 7.6% | |
Rockwell Hardness | C35 | |
Chemistry | Iron (Fe) | 71.91 - 79.85% |
Carbon (C) | 0.07% max | |
Chrome (Cr) | 14 - 15.5% | |
Manganese (Mn) | 1% max | |
Niobium (Nb) + Tantalum (Ta) | 0.15 - 0.45% max | |
Nickel (Ni) | 3.5 - 5.5% | |
Phosphorus (P) | 0.04% max | |
Sulphur (S) | 0.03% min | |
Silicon (Si) | 1% max |
At OnlineMetals, we all failed shop class. Multiple times. As a matter of fact, our employment applications specifically ask to see people's grades for their high school shop classes. If they're too high, they go into the rejected pile. We're also not engineers, and cannot make any specific recommendations about the suitability of a given alloy, temper, or shape for your project or application.
All technical data is for comparison purposes only and is NOT FOR DESIGN. It has been compiled from sources we believe to be accurate but cannot guarantee. This ends the part of the website that our pointy-headed lawyers made us put in.
-
15-5 Stainless Steel SHEET / PLATE
-
ROUND BAR 15-5 CENTERLESS GROUND
- Stainless Steel HEX ROD 15-5
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search: round bar 15-5,forging 15-5,15-5 sheet,coil 15-5,15-5 flat bar,pipe 15-5,15-5 Lrregular